No crank issue

[Flanman55]

2007 Hisun HS700  will not crank.  Replace the ignition switch. Same thing.  Replaced solenoid by the battery same thing. Can jump it and it starts good across the solenoid posts. Ran a jumper wire from switch to solenoid. Nothing 

 

can anyone suggest something else. 

[Travis]

The solenoid should have 3 wires on it, 2 big cables from the battery and 1 trigger wire, you should the same voltage (or at least 12 volts) on that trigger wire with the key in the start position.

is this what the set up looks like? https://www.amazon.com/Solenoid-Yardsport-37710-115-0000-376800010-37700-055-0000/dp/B079FH2XSM

[Flanman55]

The solenoid that cam out was a 4 wire 

 

the two from the battery to the starter and one blue and black which I assume is ignition switch and a yellow with blue strip

[Flanman55]

Here is the solenoid I took out

[Travis]

Ah okay, thats like a Lawnmower solenoid. with it being a 4 post, i'll bet you have a safety switch issue. This video should explain it for you.

 

[Flanman55]

So I was reading there is only two safety switches. The brake switch and the neutral safety switch. Is that correct? Is it the park brake switch or the foot brake switch? The brake lights work and neutral lights up on the dash so I am assuming that they are working.  Anything I need to know?

 

thanks Travis

[Travis]

I believe on most UTV's its a foot brake switch along with the neutral safety. Might try contacting HiSun to see if they can give you some help on how to test the switches.

 

[bajabus]

I am having a starting issue on a Hisun Strike 250.  As far as i can tell everything is working,  The Solenoid will start the engine when one of the trigger wires is connected to ground.  Brake switch seems to to work the brake lights come on, the Parking brake warning indicator comes on when applied and Neutral is indicated in the instrument panel.  Both trigger wires are constant hot,