Quantcast
Jump to content


Recommended Posts

Posted

Howdy. i've been through boerne once, made a stop at the 'Cave without a name'. pretty neat.

https://www.kawasakipartshouse.com/oemparts/l/kaw/500b5a4df8700223e4796d20/2008-mule-3010-diesel-4x4-kaf950d8f-parts

a service manual will also be  very very helpful once you diagnose the problem and go to fix it, https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=2008+diesel+3010+mule+service+manual&_sacat=0

does it  leak more when running? or only leak when sitting?

looking at the parts diagrams,  it appears there isn't a gasket for the oil pan, 2007 and prior models have it, but not 2008, they probably used a RTV/silicone compound. but there is a  timing cover gasket , and another gasket for the timing gear case, as well as crank oil seals, so those are all possibilities.

 it's easiest to diagnose oil leaks with a clean engine, so i suggest cleaning the block as best as possible with parts  cleaner and some rags. there are also kits you can buy with a UV light and a bottle of dye you put in the oil and the UV light makes the dye glow. that makes the process easier.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • By dilger
      Transmission vent leaks oil out of it after using 
    • By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
×
×
  • Create New...