Quantcast
Jump to content


Recommended Posts

Posted

Hi All, I have a 2004 Ranger which had an oil leak at the corner of the head gasket. I have replaced the Gasket twice along with a resurface the second time. I have performed all the re torqueing,  used the updated OEM Gaskets direct from Polaris etc...It still leaks.

Now I also have a 2017 Ranger XP 1000.  It leaks too - at pretty much the same location as the 2004. Only 150 miles driven. Does anyone have any suggestions that I need to consider before repairing it ? I'd like to get this done in one attempt. With only 150 miles on it - I'm kind of bummed on Polaris at the moment. I'd appreciate any suggestions here.

20210522_131910.jpg

20210522_131924.jpg

Posted

Wow that is quite a leak!

Whenever i have trouble diagnosing an oil leak, i use the UV dye... because oil leaks don't always come from where you think they are.

I repaired a briggs engine with it, another "pro" shop replaced the crankcase gasket, oil seals etc, to stop a leak that gathered dirt all under the engine, i removed the engine, cleaned it up really good.  put it on a test stand,  put some dye in the oil, and within a few minutes, an $2.00 O-Ring that seals the oil pump cover began weeping oil... very rare for one of those to leak.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











    • By MilSurpYinzer
      Hey all, I was just wondering what you guys consider a necessary upgrade or spare part to have or mod onto your machine.
      I'm going for a kind of shtf survival rig that's not going to be SUPER heavy and I'm looking at getting:
      A spare belt (I keep seeing this mentioned everywhere I look so it must be important)
      A spare tire and mount( So would I need a jack like one from an old jeep or something else?)
      Tire chains for the winter
      And maybe a cargo bed upgrade so things don't slide out.
      Bumpers because duh.
      I already installed high output lights and have a windshield, roof, back window, and winch. And I outfitted a Molle panel for the back of my passenger seat with extra supplies like food, first aid, and spare mags.
      Any advise on increasing durability, longevity, and having something on hand because it's absolutely necessary would be a plus.
      Thanks so much!
    • By John Gubancsik
      After sitting this winter in a garage, I noticed coolant under the side by side when I went to get it out.  Does anyone know what would cause the coolant to leak out while in storage?  Any assistance would be greatly appreciated.
      Thanks,
      John
    • By Dewayne jones
      Just bought new 2024 AODES 650 work cross 2 seated for my dad and he's very resilient at 79 and still cuts trees, splits and hauls firewood for heating home. He's begun using Polaris ATV with wagon more over his 80's toyo4x4 flatbed after the wood has been split. I figured UTV would be easier, more practical at times and more fun. It does not have a heater and would like suggestions on one that best suits his. He's tough but gets chilled easy now and a heater would make joyriding much better at this time of year. I Have found nothing that specifically Says it's made for this particular UTV I don't know what to make of the More generic Hacher versions Or how adaptable they are. I've read They have come from the factory with Heaters but It says nothing about Adding
×
×
  • Create New...