Quantcast
Jump to content

'08 (I think) Renegade R2 800cc fuel injectors


Billy

Recommended Posts

My trusty R2 has finally decided it time for some TLC. Probably my fault since I let some gasoline get pretty rancid and the fuel lines get pretty bad. I think I need new injectors but am having trouble finding them. Throwing this out to see if anyone else has had any luck.

What I know: They are Siemens Deka 5WY2404A. In a conversation with the Joyner USA folks today I was told the Gator 825I uses the same Chery engine (my local John Deere dealer says it's not the exact same but the injectors are...). He had a set of 3 in stock for almost $500. I actually found some on Amazon from companies I've never heard of for from $32 to $90 for the set. I little leery of these.

My question... have any of you replaced injectors? if you have, where did you find them and how much did they cosy?

Thanks.

Link to comment
Share on other sites

  • 2 weeks later...

I presume you tested your injectors.  There are some YouTube videos on cleaning fuel injectors - you might try that to save money if you haven't already done so.  They make it look easy.  Joyner and John Deere aren't the only ones using the Chery engine.  Surprisingly, Kawasaki has one model that uses the 800cc engine.  There are many lesser known brands that use it also.  Coleman (Hisun) is one.  Oreion is another.  Check with SxS dealers in your area.  I might gamble on the cheap ones on Amazon if you can't find brand name ones and cleaning the ones you already have doesn't work.

Link to comment
Share on other sites

I got the $32 set and it fired right up. Took it for a 5+ mile ride in my neighborhood with no issues. Took it out today on a bit more demanding ride and had some issues with "sputtering" and it was hard to crank a couple of times.

Certainly better than it was but still not where I would like it to be.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By LongSun
      I can not find it on the board, so I'm afraid I'm the only cheapo on the forum.
      What is the fuel economy of the Hisun HS590? (I guess it is the same as the HS550)
      I count in liter per 100 km, but if you use MPG it's okay with me, but please tell if you use the US or UK MPG!
    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By Greg Kilgore
      I would really like to know what you guys think about this. I'll try not to ramble and make it as clear as I can.
       
      I took this new job with companyX as a fiber splicer a year ago. I have a 45' bucket truck and 10or12 x 8 ft enclosed splice trailer I have to take home. Within the last 6 months all the management in the splice dept left. Now the power/construction management and higher ups are filling in. Just recently we were told travel to our 1st job is not payable even though we are in a company vehicle. 
      We are union so I asked the union business manager about this. His reply was be grateful you were paid travel as long as you were and that you don't have to drive your POV to the job.
       
      Last week I had 50hr total. The job area is 4-4.5 hrs away. My time was reduced to 44.5 hrs since we were told this travel thing on Tuesday of that week. I wasn't hired for this area. I was hired for area a lot closer to home. 
       
      Pay is good. Work is not hard. Insurance is through the union and so far pretty good.
      But I hate the thought of having to work extra just to make a 40hr paycheck. Anyone who has to drive as part of their job knows windshield time is not easy.
       
      Anyway what do you guys think. Should I look for a different job or just suck it up because of the decent pay and health insurance.
    • By Randyh79
      Just bought a Bad Boy Bandit 750. Need to change the oil and filter. Any suggestions would be greatly appreciated. I'm pretty sure this a Hisun 750 Sector even though it says it's a Bad Boy. I'll include pics soon.  
×
×
  • Create New...