Quantcast
Jump to content


Recommended Posts

Posted

The other day i removed my battery to check the acid level in it. It was still full. as i was reinstalling the positive cable the nut on the terminal stripped out. This battery uses a threaded insert that you slide into the terminal  the bolts screws into,  I was able to tigthen it up, but it's the kind of deal where if you kept turning it would get loose then tight, loose then tight. So after an unsuccessful trip to the parts store, tractor supply and hardware store, no one had what i needed, so then i did the smart thing and contacted Yuasa. Gave them all the battery specs and i now have new hardware kit on the way to me for FREE. For now  i have a small pair of  vice grips holding it, in case the bolt were to come loose while driving until i get a new hardware kit in. I did find the kit later on Summit racing, for $6. but hey, this is Free.

 

image.png.11e193658bcd1c932a57909c87e3b87b.png

  • Like 1
Posted

I have had good luck with CHROME Battery  products .. I ve bought 5-6 over the years for various machines. They have 24 month warranty which is twice what most have.. I had one fail at 18 months , called them, and had a new one in 3 days, FREE...Great service Dept.     CLEARLY no affiliation with Massimo!  HAHA 

  • Like 1
Posted

LOL

I will have to look into them,  this is the first time i used the OEM battery for the MULE in years. usually the O'reilly super start, get about 4 years out of a $30 battery.

 I got this one for 90 from the dealer... he came down from 130 for me. But it's done good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • By Stan M
      I have a 2026 Massimo 760L and also the Massimo snowblower attachment and would like to do a permanent install on the control cable and switch. Does anyone have a recommendation regarding the routing of the cable and mounting of the control switch?
       
    • By Terry B
      We purchased this UTV less than 60 days ago and now I am having issues with drained battery. Used UTV for about an hour then stopped and when I went to start back up my battery was to low to start it. Jumped it and it started right up and ran fine back home. Tested charging and it’s not charging while running. Can it be anything other than the stater??? Can I look for something that I can fix Quik or does it have to go to the authorized service center to stay under warranty? It will take some time to get it in and out of service 
    • By kmiller7351
      What electrical connection are missing in battery comp? it seems I am missing plug in connections and I am not sure what and how it is supposed to look like. If I can get an image and guidance would be great.
×
×
  • Create New...