Quantcast
Jump to content


Recommended Posts

Posted

How tall is a trooper on stock or 26 inch tall tires ? if someone can give me a number at the light bar and maybe at the roll bar. Thanks, i store mine at a friends and its hard to get there sometimes, but looked at a trailer today butit has 6 foot door, need to know if the trooper will fit into it

Posted
ERV JR on 27" tires your looking at 6f.7" with the light bar up, on the rollbar the without the spare it's 6.2"

Cheers Mike

Are these posted numbers or is this what it measures at ? If this is the case then the trailer may not work for me, I am around 6/1 and standing in the doorway my hair was touching. i have 26 "tires so overall height should be 1/2' shorter. maybe letting out the aiir in the tires , or maybe straping the susp down and then driving in would work

Posted

EVR JR, I measured again and the highest point without the light bar is the spare tire mount without the spare tire and this time I got 6/1 on 27s so you might just scrape in. In the manual it quotes the height at 1990mm which is 6/6 & a half so that would be with the light bar

Cheers Mike

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • By Fmaxiron
      Hit a rock last weekend and trashed my front A-arm and axle on my Outlander. I’ve been looking around for reliable sources for replacement components. A lot of listings online look a bit hit or miss, so I’m trying to figure out what’s actually worth trusting.
      Has anyone here had good luck with dealers or sites where you can buy genuine Can-Am spare parts online without worrying about quality issues or fake OEM stuff? I’d rather pay a bit more and get the right fit than deal with problems later.
      Any recommendations appreciated.
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
×
×
  • Create New...