Kawasaki Terxy 750 FI 4x4 UTV
-
Similar Topics
-
By Rey Ximenes
OK, here's the mystery of the day. I was using the UTV the other day and the idiot light came on that said it was overheating. I immediately shut down and checked the coolant. No coolant! I refilled the overflow reservoir and the radiator and all was fine. 2 days later the light is on again. I rechecked the radiator and it was again empty? Bone dry? Now, here's the weird part, There is no coolant anywhere on the floor below the vehicle. I can't even see any on the frame. I have it up on the lift and am getting ready to start tearing into the bottom "skid plate" to see if the leak is in the hoses there. Any suggestions as to where to start? I have yet to begin and I am already baffled!
-
By RVTVNUT
We have a 2019 RK750 that I have been having problems with slow cranking issues since bought the machine..I've replaced the battery so it's not a voltage issue..I have experience with diagnostic being a diesel mechanic for 30yrs..Voltage drops from 13.30 to under 8.00 under starting load..Have a new starter already ordered but a little unsure if there's anything I'm missing on installing besides just the 2 bolts and starting lead wire..Is this just unbolt and replace or is there anything else like gears inside the case I will have to deal with..Dealers and hisun don't like any info being available so you use the dealer (which are very limited) ..Thanks for any help
-
-
By jayflight1
I have a 2011 hisun 800 utv. does anyone have the correct part # for the oil filter. I have ordered 4 off of amazon and ebay and they are the right diameter but are to long
Thanks
-
By Bill House
Anyone know of an aftermarket Half Door for the Coleman UTV 400? Looking for a rigid hinged right and left door with latch... Thanks!
-
-
-
Gallery Images
![render[4].jpg](https://www.utvboard.com/uploads/1266430190/sml_gallery_475_29_593.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.