Quantcast
Jump to content

2015 Massimo Militia 1000XS V-Twin Motor partially locked up


Recommended Posts

Hi I’m new to the forums scene here and I wanted to know if anyone here knows anything about the Hisun 1000cc v-twin motors. I just purchased a used 2015 Massimo Militia with 300 miles on it. I’m attempting to rotate the crank on this motor and it’ll only rotate about 90 degrees and then completely stop. I can rotate the crank in the opposite direction and then it stops at about 90degrees back to where I initially started from. I have the clutch cover off, the stator cover off, both valve covers and both spark plugs pulled. And there is no obvious signs as to what happened to this motor. 
 

I don’t know if anyone else has had a situation like this with their 1000cc or maybe even the 800cc motors. I’m rather stumped and wanted more info if anyone has any to share. I just want to get to the bottom of what happened to this motor. 

Link to comment
Share on other sites

11 hours ago, T-boss 410 said:

Is it an overhead valve motor? Sounds like one or more of the valves is stuck open. Or, there's something in one or both of the cylinders. You could remove the heads, or maybe one of those snake cameras would give you some idea.

Yep I actually discovered the problem late last night. The connecting rod in the rear cylinder is broken. I had help rotating the crank and I saw the piston wasn’t moving in that cylinder with another person rotating the crank. I was actually able to use a small screwdriver and pushed down on the piston in the bore. So it would seem I’ll have to pull the motor and tear it down to see what I’m really dealing with. What scares me at this point is I can’t find parts for this motor. 
 If anyone has any insight it would be appreciated. I’d hate to have to spend $4K on a new powertrain on this thing. 

Link to comment
Share on other sites

I was about to type BROKEN ROD , when I read your next post..  thats not good.. you need to tear down and see what else it damaged .. cylinder, head, crankshaft ... and why it failed. I see you said it only has 300 miles?   Massimo.... strikes again ... Good luck, hope its not too bad 

Link to comment
Share on other sites

7 minutes ago, Joe Breaux said:

I was about to type BROKEN ROD , when I read your next post..  thats not good.. you need to tear down and see what else it damaged .. cylinder, head, crankshaft ... and why it failed. I see you said it only has 300 miles?   Massimo.... strikes again ... Good luck, hope its not too bad 

Yeah the more and more I look at this thing, the more I think the previous owner(s) beat the hell out of this poor thing. I’m surprised that the only thing I see missing from the thing is a fender flare on the right rear. But I’ll be tearing into it soon. Didn’t want a big project but at this point it’s paid for and sitting on my driveway. 

Link to comment
Share on other sites

yeah, Massimo cannot take a lickin and keep on tickin.. in fact, even if you baby them, they are trouble prone .. Mine was in the shop 6 times in the first year.. Massimo never paid one cent of warranty work..  Their "authorized" repair shops wont touch them unless you pay cash up front because Massimo wont pay them. 

Link to comment
Share on other sites

never said I baby mine.. I said it doesnt make a difference. because other have.. They still break. . and mine went no where for months except the repair shop.. it would run for maybe a 1/2 hour or an hour.. back to shop.. ALL AT MY EXPENSE.  I run mine in the mud but I do not abuse any motor.. ever.   I have pulled a couple others out .. But I have been towed too.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By todd93
      Hi, all! I. I'm new to the board, hoping someone could help me out! I have a 2020 Hisun Sector 550C that I bought new in 2021. Today, I took some stuff next door to my parents. When I went to leave, I turned on the key, heard the solenoid click, but no lights, no guage activity, no fuel pump, and no starter. 
       
      The battery is good, I checked all the fuses, they are good. Not sure if the relays are good, or even what to look for there. Is it possible that it's maybe a wire? 
      I'm really stumped on this one! Any help would be deeply appreciated! Attached is a pic of the fuse box layout. 
       
      Thanks! 
      Todd 
    • By donwan
      View File 2017 Hisun Strike 900 Service Manual
      Here's the service manual for the 2017 hisun strike 900.
      Submitter donwan Submitted 05/29/2024 Category Hisun  
    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By JimS409
      I picked up this Hisun 700cc for a good deal. no crank no start unit 1900 miles on it. Put a new battery and starter solenoid fired right up but sounded rough some kind of rattle/clunk noise.  Does anyone know what this noise could be? Couldn't get a better video of it running as i don't want to risk doing more damage. Drained the oil it looks good no metal in it. 

      445374820_7315077208620291_6073155782020130975_n.mp4  
    • By DLJ
      Have a Hisun 800 it runs for about 35 minutes then stalls. Crank's over but has no spark. Let it sit for 15 to 20 minutes and it starts and runs again for about 35 minutes. Changed the CDI / ECU controller and still does it.
×
×
  • Create New...