Quantcast
Jump to content


Recommended Posts

Posted

Enjoying getting a 2020 Coleman HS400 UTV-5 basket case put back together.

Finally got to start the engine tonight and let it warm up.

Have been able to find most of the missing pieces on ebay, motorcycle doctor, etc., but now I am looking for a cvt clutch cover.

It appears to be the same as HISUN, MASSIMO, Bennche, and some others but can't put my finger on one yet.

coleman power sports shows it on their site so I ordered it and got an order confirmation but haven't heard boo since and can't get a response to my inquires.

Any help would be greatly appreciated.

Thanks 

Glenn

  • Alex changed the title to 2020 Coleman UT400 basket case - need CVT cover
Posted

Glenn,

I can't seem to even find a cbt cover in any of the parts diagrams. Weird. I have heard of people melting them, and have personally melted one of a polaris atv.

Any chance you have a part number from coleman we can cross reference? I know getting parts from them can be notoriously slow.

Posted

aefron88

Thanks for the quick response!

I have been using parts diagrams from the Coleman Powersports site for the UT400. So far everything is checking out. This is the link:  https://www.colemanpowersportsusa.com/parts/utvsidebysideparts/Outfitter400UT400

On the "CRANKCASE COVER" page

# 19  CVT Clutch Cover (/11420-003-0000)  P0030001152A0000  for $64.99

#27 CLUTCH COVER GASKET P003000115230000  for $2.99

image.png.0ea3b52eeb088b730def0ecbd0477263.png

Posted

I should also mention that I have placed an order for these 2 items (#19 & #27) but cannot seem to get any confirmation that my order is in process?

Maybe I just need to be more patient but this buggy is going to be road worthy by this coming weekend (July 23)!

I am not comfortable taking it into the dusty woods without this cover?

Otherwise it does appear like it will operate fine without it?

Thanks again!

 

 

Posted

https://alpha-sports.com/coleman_parts.htm?q=coleman_parts

Punch in the parts numbers (the ones that end in 000) It shows the cover as $82.15.

The cover is vented to it will let dust thru. It is mainly to keep mud/water from splashing on it, and stuff from getting stuck in it. These things are adapted from ATV's and the engine/driveline setups are the same. On an atv your foot/pants would risk getting sucked up in the belt. I think you should be ok driving around with the cover off as long as you don't drive thru any big puddles or over a bumch of loose brush.

Posted

Thanks again!

I will check out that option.

And honestly, it would be near impossible to keep me from driving it.

When it fired after 2 weeks of re-assembly, I jumped up and down like a kid! (@64 years old)

I just love working on this kind of thing.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • By BWF
      I have a 2011 or so Landmaster LM200.  I cannot get it to start.  I turn the key and nothing happens.  The brake switch seems to be working, the ignition switch works.  The Coil is new the Voltage Regulator is new and the starter relay is new.
       
      I can connect the terminals on the starter relay and it starts right up and runs fine.  I just can't get it to start by turning the key.
       
      I am having a bit of trouble bleeding the brakes, not much fluid comes out at the calipers when I am pumping the brakes, though that an air bubble near the brake switch might make it not sense that the brake pedal is depressed.
       
      I am at a loss, please help!
       
      Brad
    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Dave Jones
      So with seat belt on  I can only get up to 20mph then it starts bucking until I get under 20 again. Diconnected the seatbelt and same thing. Reconnected seatbelt and unplugged speed sensor. Zoom..it flies. But now I have no speedometer. I have a new speedometer sensor on the way..any other ideas?
×
×
  • Create New...