Quantcast
Jump to content

Hisun 2009 "clunk"

Geof Rohrlach

By Geof Rohrlach
in Hisun UTV SxS Forum

 Share

Recommended Posts

Geof Rohrlach Newbie

Geof Rohrlach

Posted
Posted

love the forum. We just got a mostly rebuilt Hisun 2009, runs great, no electrical issues yet, however notice a grind and clunk after accelerating and stopping, such as at a stop sign. Sounds like wire caught underneath. We looked it over and only thing that comes close to being in the area is the secondary clutch. Some wear and play noted there. Will replace, but not sure if we are going to fix the problem.

Link to comment
Share on other sites
  • 3 weeks later...
aefron88 Community Regular

aefron88

Posted
Posted

Interesting. the shift shaft and driveshaft are under where the secondary is also. I wonder if the shifter adjustment is off, and its popping slightly out of gear, and then popping back in? I'm thinking maybe the grind is it slightly out of gear, and the clunk is it popping into gear under load.

Not sure which model exactly you're talking about? Is it the console shifter or a dash mounter shifter?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • todd93
      Hisun Sector 550C total electrical failure.
      By todd93
      Hi, all! I. I'm new to the board, hoping someone could help me out! I have a 2020 Hisun Sector 550C that I bought new in 2021. Today, I took some stuff next door to my parents. When I went to leave, I turned on the key, heard the solenoid click, but no lights, no guage activity, no fuel pump, and no starter. 
       
      The battery is good, I checked all the fuses, they are good. Not sure if the relays are good, or even what to look for there. Is it possible that it's maybe a wire? 
      I'm really stumped on this one! Any help would be deeply appreciated! Attached is a pic of the fuse box layout. 
       
      Thanks! 
      Todd 
    • donwan
      2017 Hisun Strike 900 Service Manual
      By donwan
      View File 2017 Hisun Strike 900 Service Manual
      Here's the service manual for the 2017 hisun strike 900.
      Submitter donwan Submitted 05/29/2024 Category Hisun  
    • JimS409
      2011 Hisun 700
      By JimS409
      I picked up this Hisun 700cc for a good deal. no crank no start unit 1900 miles on it. Put a new battery and starter solenoid fired right up but sounded rough some kind of rattle/clunk noise.  Does anyone know what this noise could be? Couldn't get a better video of it running as i don't want to risk doing more damage. Drained the oil it looks good no metal in it. 

      445374820_7315077208620291_6073155782020130975_n.mp4  
    • DLJ
      Hisun 800 shuts down
      By DLJ
      Have a Hisun 800 it runs for about 35 minutes then stalls. Crank's over but has no spark. Let it sit for 15 to 20 minutes and it starts and runs again for about 35 minutes. Changed the CDI / ECU controller and still does it.
    • hdtran
      How to wire winch remote on Hisun Sector E1 ?
      By hdtran
      It's not immediately obvious to me how to wire a remote control (wired or wireless) on the Sector E1.
      Has anyone here done this? Do you have pictures on how to get to the wiring?
      Thanks!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...