Quantcast
Jump to content

Mule 610 stalling while plowing snow.....


Recommended Posts

Question for the group....i have a 2015 Mule 610..........been pretty reliable....250 hours on meter.....this past weekend, i was plowing snow..........yes, extremely cold, but i noticed that Mule ran fine when running around the neighborhood, but when i went to plow, especially when the snow was heavy,  when i would come to the end of a "push", the thing would stall out......started right back up with no issues......ran ok otherwise.................doesn't miss, doesn't backfire, idles fine otherwise.....any thoughts? thanks

Link to comment
Share on other sites

9 hours ago, Travis said:

first thing that comes to mind is fuel supply.  whens the last time you changed the filter?

thanks for responding...........that was my first thought, but fuel filter was changed sometime earlier this year..........i took it out again yesterday......plowed some snow, and ran around the property running thru 10 inches of snow............no issues......the only difference is the temp yesterday was about 25, no wind.................when i had the issues, it was -8, with 35 mph winds...............i did add some fuel dryer in between times.....is it possible that i had a small chunk of ice in the filter, that was causing the problem?........i always run with fuel stabilizer, but the fuel dryer was a new additive............

Link to comment
Share on other sites

  • 2 weeks later...
On 12/28/2022 at 5:50 AM, Scott Meszaros said:

thanks for responding...........that was my first thought, but fuel filter was changed sometime earlier this year..........i took it out again yesterday......plowed some snow, and ran around the property running thru 10 inches of snow............no issues......the only difference is the temp yesterday was about 25, no wind.................when i had the issues, it was -8, with 35 mph winds...............i did add some fuel dryer in between times.....is it possible that i had a small chunk of ice in the filter, that was causing the problem?........i always run with fuel stabilizer, but the fuel dryer was a new additive............

couple ideas, its fuel issue, could have ice crystals in fuel tank, throw some additive in the fuel second fuel pump, saw this several times pump seems to work but not to capacity required for loading high rpm motor

  • Like 1
Link to comment
Share on other sites

2 hours ago, laurence noon said:

for information regarding the fuel pump, they go weak idle all day but full power they will not supply enough fuel to keep going, what I found Walmart sells the fuel pump for under 20 dollars, here I have to order on line keep a couple around, one in the glove box

will do laurence noon............good idea...................i am careful not to idle it for long periods of time...........

Link to comment
Share on other sites

  • 5 weeks later...

we use our Mule fxt 820 to plow snow. It has been fine of the last two years. We have it serviced every spring. This year it started to cough and cug on the uphill part of the plowing. We would let it cool down then it would seem OK for a while. There is no way to get it off the mountain in the winter, so we started trouble shooting ourselves. We found that the vacuum holes had failed, so we replaced them. then we replaced the fuel filter. Those things did the trick It is running fine now.  We are disappointed that these things were not a part of the serve last spring, the service manual doesn't include these items as standard Maintenace, which I think is odd. By the way, we purchased the Service manual, which was very expensive. I used to write technical manuals before I retired. This manual it probably one of the worse I've seen., the layout is terrible. References between sections don't include page numbers and the titles are sketchy. Kawaski hire a professional writer. 

Anyway, if you are having problems with power or cugging, try the vacuum hoses and fuel filter.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Greg Kilgore
      I would really like to know what you guys think about this. I'll try not to ramble and make it as clear as I can.
       
      I took this new job with companyX as a fiber splicer a year ago. I have a 45' bucket truck and 10or12 x 8 ft enclosed splice trailer I have to take home. Within the last 6 months all the management in the splice dept left. Now the power/construction management and higher ups are filling in. Just recently we were told travel to our 1st job is not payable even though we are in a company vehicle. 
      We are union so I asked the union business manager about this. His reply was be grateful you were paid travel as long as you were and that you don't have to drive your POV to the job.
       
      Last week I had 50hr total. The job area is 4-4.5 hrs away. My time was reduced to 44.5 hrs since we were told this travel thing on Tuesday of that week. I wasn't hired for this area. I was hired for area a lot closer to home. 
       
      Pay is good. Work is not hard. Insurance is through the union and so far pretty good.
      But I hate the thought of having to work extra just to make a 40hr paycheck. Anyone who has to drive as part of their job knows windshield time is not easy.
       
      Anyway what do you guys think. Should I look for a different job or just suck it up because of the decent pay and health insurance.
    • By Randyh79
      Does the transmission share the crank case oil with the engine or does it have its own oil seperate from the engine?
    • By Keith k
      Just got this kymco 450i Uxv from a guy, drove it around before I paid. Got home drove around town a little while the next day and it started squealing and amd didn’t want to go. Got to looking at the clutch, that’s were the noise is coming from, the primarily sounds like. Maybe a bearing in there cause the grinding noise and it only makes the noise when you go to move.
    • By Travis
      View File Kawasaki Mule 550,520,500 Complete service manual
      This is a complete service manual for the Kawasaki Mule 500,520 and 550 models.
      Topics  covered include Brakes, Steering, Electrical system, suspension and fuel system. As well as engine repair procedures and Transmission/Final Drive procedures.
       
      ********************************************************************************************************************************************************************************************
      If you need more information about the engine this manual linked below is chock full of information.
      Thanks goes to @cliffyk for getting these files all  into one PDF format for uploading.
      Submitter Travis Submitted 04/18/2021 Category Kawasaki  
    • By moonrover
      Mine is overheated/burned/melt at connection with its wire connector, parts are ordered to replace both them.  This seems to be a common issue, and some of you already replaced it. I right now just connect the wires, so the fan runs  all the time whenever the initiation is on, but it's better let fan runs as needed with a working temperature sensor/switch. 
      Question: Does some coolant come out by removing the switch/sensor from radiator?  Or, is the threaded hole all the way inside radiator?   If the answer is yes,  I want to drain or extract  some coolant to make its level below the sensor before replacing it, so I don't make a mess with coolant spilled out 
      Thank you.  
×
×
  • Create New...