Quantcast
Jump to content


Recommended Posts

Posted

I was backing up a hill tonight with the diff lock on in my 08 prowler xtx and POP. i knew it didnt sound good so i drove up to the house and grabbed the front drivers side axle and sure enough the wheel end is flopping around inside the boot. I just got this prowler and was wondering if maybe it is possible for something to just pop out, or did i infact snap the shaft??? if i did wreck the cv does anyone know if the drivers side is considered the front "left" or "right"??? is there any cross reference parts that are cheaper that will fit??? any info would be great. thanks

  • 1 month later...
Posted
I was backing up a hill tonight with the diff lock on in my 08 prowler xtx and POP. i knew it didnt sound good so i drove up to the house and grabbed the front drivers side axle and sure enough the wheel end is flopping around inside the boot. I just got this prowler and was wondering if maybe it is possible for something to just pop out, or did i infact snap the shaft??? if i did wreck the cv does anyone know if the drivers side is considered the front "left" or "right"??? is there any cross reference parts that are cheaper that will fit??? any info would be great. thanks

Driver's side is front left.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Thearm
      I have a 2018 TW450 that runs fine on flat ground but dies out when under load going uphill. Changed the gas filter and spark plug with same results. Letting it set for a few minutes it will run until it hits a incline. Belt is not slipping, but the engine just dies out and doesn't even want to run in neutral. Any ideas as to what I can try is appreciated in advance. Also only run non-ethanol for fuel.
    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By paul allen
      right front axle cv joint boot keeps getting torn up from the inside out....the stock one was damaged from a stick...i have replaced  the axle 4 times with aftermarket axles that fit fine..after 4-5 miles of riding even on grass.the outer boot get torn up from the inside out...all 4 brand new alxes...bearings are fine nothing bent everything fits just fine....nothing seems to be binding.....any thoughts?????
       
       
      thanks...pa
       
    • By CarlB
      I have a 2022 Hisun 750 Sector which comes with a locked rear differential. Was wondering if it would be possible to install an unlocking differential.  I see that there are some Hisun made machines that come with the unlocking rear diff, such as Cub Cadet Challenger, some of the Massimos, and probably others. My concern is whether these would be a direct bolt on, using the original axles, drive shaft, and of course matching gear ratio. I've tried to match up part numbers but it seems every brand has their own number system even for parts that I know are identical. If anyone has ever done this swap or has any information about the whether these unlocking rear diffs are comparable to the Sector, I'd appreciate your input.
    • By John Gubancsik
      After sitting this winter in a garage, I noticed coolant under the side by side when I went to get it out.  Does anyone know what would cause the coolant to leak out while in storage?  Any assistance would be greatly appreciated.
      Thanks,
      John
×
×
  • Create New...