Quantcast
Jump to content


Recommended Posts

Posted

I'm sure many of you are aware of Michigan's emergency brake requirement.  I'm wondering if anyone has a good solution. 

Beyond paying the few fab places $$$$.. I'm curious is there another rear caliper with e brake style that would interchange with slight mods to  the Maverick sport rear mounting bracket?

  • 11 months later...
Posted

Ok. I read up on it. Yes, Joe Breaux, I’m surprised it isn’t built with one also. Any vehicle with this type of transmission with no direct full time connection to the wheels should have one. And I would venture to say every type should have one regardless of transmission type- on or off road. Here’s a glitch. On vehicles where the drive shaft has a brake, if you have an open differential, you technically do not have two wheels braked. Hmmm. 
Pop Bob

  • 1 month later...
Posted

Disclaimer:  I am a hopeless tinkerer.  

Depending on whether the regs specify that the E brake be a separate brake from the regular brakes, what if..... (here goes)....

You fashion a bracket under the dash near the brake pedal's mounting arm.  Some kind of a ratcheted lever that you could engage with the brake pedal's arm to hold the brake pedal down locking up the brakes.  Then a release latch to let it go.  Maybe something as simple as a notched arm bolted to the floor that pivots over to hook onto the brake pedal's arm and keep it down and the brakes engaged.  ??

Like I said, I am a hopeless tinkerer. 😉 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • By Firewalker918
      I have a 2021 UV34XL and I am kind of looking to change it up from the orange wheels and maybe do a wrap?  Please share photos of any XLs that has been modified to look better and any seat covers recommended.thanks
       
    • By mehe
      Hi everyone and I hope that is not a too forward questions for us newbies. 
      My husband and I are ready (next Spring) to open our newly developed nudist campground in Iowa and we are now looking for interesting activities to host. 
      Don't worry we are not going to try and sell you a membership because as of 2 weeks ago all of our 50 campsites are sold out for the 2024 season. 
      It was my job to sell site and now that is complete i am looking for interesting actives host for weekend. 
      We have 300 acres of woods, grassland, swamps and 2 small ponds/lakes and dozens of miles of riding trails.
      we have gotten county approval for the complete 300 acres to be clothing optional. 
      We think we have a great spot for a weekend or several day ATV / mudder event. 
      Clothing would be optional for all participants and plenty of room for overnight camping and outdoor group showers. 
      Now we are looking to you pro  ATV riders to let us know if you think your group of people would fit in with ours. 
      Feel free to ask anything you would like to get a better idea of what we offer.

    • By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
×
×
  • Create New...