Quantcast
Jump to content


Recommended Posts

Posted

starts up you have keep rpms up for 5 minutes till it warms up then runs fine. But if it stalls wont start unless you unplug fuel pump and hold it to the floor till it starts then plug pump back in and run it till it warms up then it is fine all day.

Posted

Have you tried resetting the ECU? Likely something funky happened with the IAC settings or the fuel trim.

When running rev it to redline in neutral, and shut it off with the pedal still floored. Wait 5 seconds and then let off the pedal and restart as normal

...or you can use the codescanner method if you have the codescan cables and HUD ECU hacker

  • 4 months later...
Posted

i bought the plugin connecters that you mentioned or the hisun 400 utv 2020. and the 6 pin plug was different so i had to cut the plastic housing away for the pins to plug in.and i get no readings or power through it. i looked on amazon or the right one but cant find it.if someone can help of were to find the right one would be great.have the hud hacker and everything else its just the plug to the bike?

Posted

I am curious Does the 2008 Cub Cadet Tracker have this chip in the ECU?  How do I go about checking codes in it, does anyone have an idea please.

  • 2 weeks later...
Posted
On 8/20/2024 at 10:48 PM, shawn b said:

i bought the plugin connecters that you mentioned or the hisun 400 utv 2020. and the 6 pin plug was different so i had to cut the plastic housing away for the pins to plug in.and i get no readings or power through it. i looked on amazon or the right one but cant find it.if someone can help of were to find the right one would be great.have the hud hacker and everything else its just the plug to the bike?

got mine off ebay, should not require any cutting if you get the right adapter.

Mine came slow boat from China, but there were domestic alternatives there for more money.

Posted
On 8/24/2024 at 11:57 AM, NDV45 said:

I am curious Does the 2008 Cub Cadet Tracker have this chip in the ECU?  How do I go about checking codes in it, does anyone have an idea please.

If I had to guess a model that old is likely carberated, and would not have the Delphi ECU.

Sometime in the mid/late teens is when Hisun switched to fuel injection/Delphi ECU system

  • 4 months later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • By KWinTX
      I just bought a new 2024 Hison 550 Stryker 2 months ago. this is the second time I have had this issue.  It only has about 20 hours on it. The last time it happened we took it back to the dealer. it was a fuse.  Since we live three-hour time driving there and back. I would like to find another solution if possible.  I have tried all the fuses that seem to have anything to do with starting.  Currently checking the battery. The battery is new. it came with the unit. It is probably 6 months old.  the UTV has all power to everything electrical. lights turn signals and radio all work.  When trying the key to start . it is 100% dead. as in it doesn't even click.  There is a low whirring like the fuel pump is turning on though. The Unit was running and driving just fine.  we shut it down for the night. The next morning my wife found it in this condition.  Thanks for any Ideas or solutions???   Otherwise, it goes back to the dealer tomorrow. Just hope I didn't buy a lemon. Great little UTV when it does run.😅  anyone else ever have this Issue..? 
    • By BigWave
      I turned off the key and then tried to start it a minute later and it would not start. I changed out the fuel filter and the injector. still nothing. if i have the injector pulled out and close to the hole the injector will spray fuel into the hole and it will run but the minute you put the injector in it will die. any idea's please
       
       
      Bigwave
       
    • By Ed Michael
      My older LM 650 is blowing fuel into the air cleaner.  Any idea on what would cause this?  It is the Suzuki motor.  Not sure what model year it is.
      Thanks
      Subaru SxS.mp4
×
×
  • Create New...