Quantcast
Jump to content


California’s only ATV & UTV Jamboree

Alex

By Alex
in UTV Events and Rallies

 Share

Recommended Posts

Alex

Alex

Posted
Posted

website_hdr.jpg

California’s only ATV & UTV Jamboree

EASTERN SIERRA ATV & UTV JAMBOREE BEING SPONSORED

BY THE NORTHERN MONO CHAMBER OF COMMERCE (NMCC)

California’s only ATV & UTV Jamboree held in the Eastern Sierras.

FOR IMMEDIATE RELEASE

Walker CA, January 1st, 2011 – ATVs & UTVs will participate in guided rides to scenic and historic destinations in Toiyabe National Forest, June 15 – 189, during the only ATV & UTV Jamboree to be held in the Sierra Nevada.

This is the fourth year that the Eastern Sierra ATV & UTV Jamboree has been held.

Sponsored by the Northern Mono Chamber of Commerce, under permit from the USDA Forest Service, the Jamboree’s routes travel thru high desert plains and forests, along creeks, streams and lakes to ridge top views of the Sierra and Sweetwater Mountains. Scenic and historic destinations including Lobdell Lake at elevation 9500 feet, an abandoned log cabin and a mine dating from the early 1900s.

Three days of guided trail rides through some of the most beautiful lands around. Each trip is led by a local ATV guide who is experienced at traveling the routes. There are no “technical” rides, though each ride is rated from beginner to advanced. The rides last 5 – 8 hours and range from 50 to 100+ miles. Drivers must be 16 years old, though children under 16 can ride with an adult on an ATV or UTV capable of carrying two riders. New trails are expected this year in addition to the previous trails. Registration will open on February 1st, 2011.

The Eastern Sierra ATV & UTV Jamboree is limited to 150 riders and costs $125 per rider, including three full breakfasts, one Saturday evening dinner, t-shirt and other goodies.

Additional dinner tickets cost $12 per adult, $7.50 per children (12 and under) and free for children under two. More about the Eastern Sierra ATV & UTV Jamboree and rental ATVs can be obtained by calling 530-208-6078 or by visiting www.easternsierraatvjamboree.com.

Media Contact:

Tim Fesko, 530-208-6078

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • AaronD1982
      Massimo Buck 400S UTV Stator......?
      By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • AaronD1982
      Massimo 400S Buck UTV Starter solenoid replacement
      By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
    • Eman85
      Best place to find info on Hisun or Massimo UTV's
      By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • Jeff freeman
      Utv wont start and broken fuel injection wire
      By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...