Quantcast
Jump to content


Recommended Posts

Posted

I am a new owner to a 2009 Joyner Commando and I am looking to purchase new tires and wheels. I do not know the size of the rims and the 4 lug pattern measurement. I am looking for some figures here. I need to know the stock rim size. The tires that are on there now are 27x8x12 front and 27x11x12 rear. And if you have any good websites to purchase....please share. THANKS

Posted (edited)

I am a new owner to a 2009 Joyner Commando and I am looking to purchase new tires and wheels. I do not know the size of the rims and the 4 lug pattern measurement. I am looking for some figures here. I need to know the stock rim size. The tires that are on there now are 27x8x12 front and 27x11x12 rear. And if you have any good websites to purchase....please share. THANKS

I don't know your bolt pattern but your rims are 12". The way you read this 27x8x12 the 27 is how tall your tire is the 8 is how wide it is and the 12 is your rim size This might help you http://www.jmcmotors...50cc_C22009.pdf welcome to buggynews. the wheels should be a 12x7 with a 4 inch back space and a 4x115 bolt pattern.

Edited by plumber
Posted

Same as the Trooper only 12". Cheapest thing to do is find a set of Trooper wheels & use the tires until bald. Then replace from DiscountTireDirect,com or RockyMountain.com

Both also have wheels if you want to buy aftermarket.

The specs on the Trooper wheels can be found in one of the Pinned Topics at the top of the Joyner Forum.

rocmoc n AZ/Mexico

Posted

Hey all who responded,

thanks for helping. I found a place on the internet who sells Joyners and tires to fit. This is what I found out from the manual and my own measurements.....

Rims: front 12x6 and rear 12x8 bolt pattern 4/115 and offset is 4+2 in the front and 6+2 in the rear. The stock tires are 25x8x12 and 25x10x12.

Same as the Trooper only 12". Cheapest thing to do is find a set of Trooper wheels & use the tires until bald. Then replace from DiscountTireDirect,com or RockyMountain.com

Both also have wheels if you want to buy aftermarket.

The specs on the Trooper wheels can be found in one of the Pinned Topics at the top of the Joyner Forum.

rocmoc n AZ/Mexico

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • By Eman85
      I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 
        Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 
×
×
  • Create New...