Quantcast
Jump to content


Recommended Posts

Posted

I'm in need of ramp assist for my utv trailer. I found a few, just ckg to see if anyone here knows anything about which is good,or better.Or has found & used different one. I can't lift much or bend very well, sooo, I need something to help? Wife won't lift it either!!! : )

Quig

http://www.easternmarine.com/Double-Barrel-Trailer-Gate-Assist-RA27C--0/

http://www.easternmarine.com/BUYERS-EZ-Gate-Trailer-Tailgate-Lift-Assist-5201000/

Posted

If you have one of the trailers with the heavy expanded metal ramps, it is a pain. My utility trailer has one and it is everything I can do to left it at this time. Who knows in another couple of years. I have seen people add a metal upright post with a wheel at the top. Then mount a boat wench on the side and routed thu the wheel. The wench does all the work.

rocmoc n AZ/Mexico

Posted

If you have one of the trailers with the heavy expanded metal ramps, it is a pain. My utility trailer has one and it is everything I can do to left it at this time. Who knows in another couple of years. I have seen people add a metal upright post with a wheel at the top. Then mount a boat wench on the side and routed thu the wheel. The wench does all the work.

rocmoc n AZ/Mexico

Yep, expanded metal ramp, with extra braces for weight of trooper.. Did you look at examples i attached? Looks like they would work, I hope.. Gorilla lift is good, but you buy 2 at about 190.0 each,plus shipping. these I attached were only 119.95,& shipping..

Posted

Yep, expanded metal ramp, with extra braces for weight of trooper.. Did you look at examples i attached? Looks like they would work, I hope.. Gorilla lift is good, but you buy 2 at about 190.0 each,plus shipping. these I attached were only 119.95,& shipping..

You'l love the way I fixed mine, being handicapped, it was a must, It's simple and works great and I built it my self for under $100.00, and no, it's not let the wife do it!!!! :lol:

I'll take some pictures of and post them tomorrow. I got a winch like what you pull a boat onto it's trailer and added a bar with a pulley at the top to give the winch the mechanical advantage to lift the gate. Simple, no stooping to get the ramp, worst part is the time it takes, but only compared to that of a healthy 30 year old, but I'm 60+ and have the time, not the flexibility.

PS, almost missed this request because it wasn't on the joyner page.

Posted

You'l love the way I fixed mine, being handicapped, it was a must, It's simple and works great and I built it my self for under $100.00, and no, it's not let the wife do it!!!! :lol:

I'll take some pictures of and post them tomorrow. I got a winch like what you pull a boat onto it's trailer and added a bar with a pulley at the top to give the winch the mechanical advantage to lift the gate. Simple, no stooping to get the ramp, worst part is the time it takes, but only compared to that of a healthy 30 year old, but I'm 60+ and have the time, not the flexibility.

PS, almost missed this request because it wasn't on the joyner page.

Appreciate any ideas,,

PS, sorry,put it here to get attention of maybe other "old" utv people? : ) :rolleyes:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • By Mitch13
      2022 Coleman 400 with 13 hours on the engine and the mice got to it. Every wire coming out of the steering column in one cluster has been eaten through. I tried reconnecting matching wire colors to each other and I get the left turn signal and hazards to work, nothing else. If I play around a bit I can get the horn to honk or headlights to come on but only when I connect them to the brown wire. Obviously I don't know what I am doing here. Does anyone have a picture of how these wires are connected when they are under the hood on the drivers side coming from the steering column?
      Gray - seems to carry power
      Brown - left turn signal
      Green with purple stripe - hazards?
      Pink with red stripe - horn?
      Green - head lights?
      Yellow - head lights?
      Yellow with red stripe?
      Blue?
      Dark green?
      There is also a bundle hanging under the hood not connected to anything green with yellow strip, brown and blue?
      Other than that issue, I am about ready to sell this for parts if you interested let me know.
      Thanks
    • By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
×
×
  • Create New...