-
Similar Topics
-
By Sommer Wildes
TLDR (too long didn't read) in blue for quick scanning
Hey all! I'm new to the Side-by-side/UTV world. We own a smallish farm and decided to go with the 2021 Tracker 800LE Crew. We like the seating and the ride is smooth. However as a newbie I have some questions that maybe some of you longtime side-by-side/UTV owners can help with. We're still in the "break-in" period and it seems that after 30 min or less of driving the dash area gets super hot. You can feel the heat waves coming off the floorboard by your feet and my phone sitting in the little hole (where a radio might go) felt like I left it in the hot sun for too long. The glovebox was also way too hot.
So the question is, is this normal, or should I start checking engine coolant and filters? We literal have had it a day. I have read forums and looked up info and can't find anyone mentioning this issue. I just don't want to burn the thing up before we've even put it through it's paces ya know!
Thanks for any help!
-
By Modrob
Some time ago unit stalled going uphill towing a small motorcycle. Some smoke and smell of rubber burning. Removed belt and it looked ok but the case area was grimy with grease-like sludge. Cleaned it all out and installed new belt and front variator pulley assembly. Within a few minutes of running it was destroyed in pieces—this was low speed but uphill, with jerking/stuttering.
I then opened it up and removed the belt remains, but reinstalled the old belt. It runs again but again has the stuttering/jerking when accelerating from stop, or when slowing down to about 1-2mph…changed transaxle fluid and no difference.
Any ideas?
-
By johnney
i have a 2011 ys 400 and when i lock in the 4x4 right front axle doesn't lock in , actually grinds a little but doesn't lock in...
HELP FROM MINNESOTA
-
By NicholasNWM09
Hello Everyone,
COOL NEW Product Alert!
A company called NEW Wire Marine or NEW Wire has Badass custom panels for UTV, Buggy/Hunting trucks. From Fully wired switch panels with laser etched rockers with backlights in 5 different colors, to just parts like voltmeters, phone, USB and 12 v chargers. Rockers can be printed, or custom laser etched rockers and they even have sleek labeled pushbuttons. They are a first-class company with a great knowledgeable staff and outstanding customer service. Switches are based on 12v or 24v circuits and they also have marine grade wire and connectors, which is perfect for waterproofing your system!
Go check them out!
Check out the websites : https://newwiremarine.com/ and https://rockerswitchpros.com
-
By djl
Hi All! I thought that the drive system was making a bit more noise than I expected so I secured the belt drive cover aside and ran up the rpms in neutral to check for bearing noise, etc. There wasn't any noise but I did notice that the primary sheave did not close as far as I expected, the belt only came within ~3/4" from the top of the sheave. See video link below (I was unable to upload it directly). I ran the RPMs up 5,000 (manual indicates that this is max for this engine). Is this expected behavior or should I remove the primary sheave and check roller diameters, clean & re-grease everything? I will be traveling with newer machines so want to be sure that I can travel as fast as this machine is capable. 🙂 Thanks in advance!
https://www.dropbox.com/scl/fi/qof63w1kohal8wzmikfpt/IMG_0234.MOV?rlkey=j4h8ejm0ogjvlluyy5olagvrn&dl=0
-
-
-
Similar Tagged Content
-
Go Crazy Lighiting - a global solid vendor of led whip light and rock light
- whip light
- rock light
- (and 11 more)
- 0 replies
- 1,027 views
-
- 0 replies
- 2,119 views
-
- 0 replies
- 2,880 views
-
- 0 replies
- 4,823 views
-
- 0 replies
- 2,319 views
-
-
Gallery Images
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.