Quantcast
Jump to content


install

charlie

By charlie
in Joyner UTV SxS Forum

 Share

Recommended Posts

charlie Experienced

charlie

Posted
Posted

hey guys if you wanna see the new shocks on the trooper go into my pics under "new color". The front are in gotta trim the fenders glad I went with the limit straps the inserts that I had made for the shock mounts fro the new bolts fit awsome!!! Left rear shock is in now to adjust the rear locker and put the Righ side back together. Its still sitting on the jack stands so far.

post-1042-0-68557900-1343736591_thumb.jpg

post-1042-0-37381900-1343736609_thumb.jpg

charlie Experienced

charlie

Posted
  • Author
Posted

ok folks heres an update so far

1 got all the shocks and straps in and then pulled them back out having more nitro put in. I started with a 300 psi charge on all of the. fronts not bad but a little to soft, the rears way to soft lost to much ground clearence talked with the guys at fox and got new pressure amount to be set today going 350 in the front and 480 in rear. Hopefully I will have it together tonite. NO i have not driven it yet this was just in the garage rear was to low for a ride I felt. I will keep you all updated.

2 any of you guys had trouble adjusting your locker cables I kow Lenny did make a post about how to adjust and I kinda get it, my locker was working, and since I have reinstalled the rear diff I cant get it to engage its not the diff I can pull the pin on the diff no problem there. Maybe I have the cable routed wrong and now its to long ?????? =( any input thanx

Guest Lenny

Guest Lenny

Posted
Posted

The routing of the cable shouldn't make any differance unless you have is bent around a corner real sharp. Make sure the cable is lubercated and have someone actuate the lever while you check if it is pulling the pin out correctly. There are 2 places to adjust the cable. One is at the differential and the other is at the lever. Also make sure the cable is seated correctly into its adjuster sleeve at the lever side.

Lenny

charlie Experienced

charlie

Posted
  • Author
Posted

Lenny thanx fro the tip!! Ill double check the cable routing last night I sqirted a lot of PB blaster down the cable at the top by the lever didnt come out the other end though, I did adjust the cable once up by the lever and I cant imagine the rear locker wasnt working I know my trails and know were I do and dont need to lock it for wheel slip. I have adjust it back and forth at the diff and nothing yet enless my wife moved the wrong lever lol cable is routed pretty much were it always has been Ill double check it tonite. Should I maybe unadjust it at the lever and start as if its new or just play with the diff adjustment cause thats all I touched??

Guest Lenny

Guest Lenny

Posted
Posted

The main thing is that the cable pulls the pin the right amount. Doesn't matter where you adjust it to get there. When you adjust it, jack up the rear wheels off the ground so you can spin them to feel when it's engaging and disengaging. Once it starts to engage, the pin should be pulled another 1/4" or so.

Lenny

charlie Experienced

charlie

Posted
  • Author
Posted

Ok shock update!

Took shocks to local 4x4 shop to have more nitro put in had fronts charged to 350 psi. Installed the back in trooper I think there gonna be a little stiff no biggie I can adjust down. So I had the front charged by the shop as well I was told the shocks were shipped at 300 psi then come to find out it was 280 the rears were at so I had rears charged at 440. Put rear shocks in buggy and the trooper is a low rider half the ride hieght is gone!!!! So no I'm calling offroad warehouse and I'm pretty aggravated not getting anywhere. The guy I spoke to and bought shocks from is out for next two days and the guy I spoke with wants me to buy bigger shocks I said NO!! So I call fox give them all the info I have collected told them everything that is going on and that I have not even driven the trooper yet! They were shocked lol no pun intended so they say I'll tell u what we stand behind our stuff all the way and something doesn't sound right if u wanna pay for shipping both ways we will set them charge them and go threw them with no charge to you except shipping! I said really hell ya, so the guys at fix call me today say there's hardly any oil in the shocks and they were only charged at 350psi. Of course I'm pissed but kinda relieved there putting about 28cc of oil in them setting them to 500 psi and shipping out tomorrow so I will have them on Friday. So in my own opinion fox has great customer service offroad warehouse is ok but I feel like they dropped the ball and my local offroad shop sux!!!! First test drive should be this weekend!!!!!! Fingers crossed

Tinman Community Regular

Tinman

Posted
Posted

I found the locking adjustment really finicky too. At first, I had to remove both cables completely, spray Wd40 t clean them, then grease them with motorcycle chain lube. That had them moving smoothly. Once done, I did what Lenny suggested and rasied the ends up, one at a time.

Tip: Use the little red tube WD40 and chain lube comes with, insert it into the cable end and tape it with electric tape to force the fluid through the cable.

charlie Experienced

charlie

Posted
  • Author
Posted

Tinman thatnx for the tip on lubing the cable I actually have been squirting PB bkaster down the cable I will try the WD40 as well the tube I think is smaller. Ok the part # for the straps

22" 18122

18" 18118

The lenghts are actually little over 22" AND 18" they said the straps will stretch about 1/2" I got them from offroad warehouse

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • Gerald Dillman
      2008 Joyner trooper transmission parts
      By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • Karlibob
      2020 Tracker 800 sx front end noise
      By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary
    • Paul L
      Kubota RTV-XG850 Sidekick shifting into nuetral problems
      By Paul L
      When I am driving at 30 to 40 mph on the highway, the display will change from H (high) to R (reverse).  It does not actually shift into reverse, it seems to shift into neutral and starts losing speed and the gas pedal has no effect.  After the rpm/speed drops for 5 seconds or so, it changes back to H and runs fine for another minute or so.  You have to try to drive it at less than 5000 rpm or so, to try and keep this from happening.  Any ideas on what the problem might be?  It only happens at the higher speeds.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...