Quantcast
Jump to content

Installing Turbo


Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

How is that intake working for ya so far???

the controller i got from dedub i kept for myself although i have a Trooper in the shop now for a turbo and intake kit and 3 more to follow so i am gonna need to order 4 more from you soon....

Josh

No Limitz

just let me know my manfoild working good
Link to comment
Share on other sites

I'm running stock injectors right now because I only have the standard EJK controller, no vacuum port. When I tried running the 19lb injectors it was too rich before boost kicked in. I'm hoping to get the controller with the vacuum port so I can get the 19lb injectors dialed in. The turbo will run fine on stock injectors and 6 lb boost. I'm trying to run 10lb boost, and I know there's more power there than what I can get because it goes lean (17~18 on the AFR gauge) at 10lbs with stock injectors, EJK max injection.

Dedub, how is the vacuum ported fuel controller working for you?

Link to comment
Share on other sites

I'm running stock injectors right now because I only have the standard EJK controller, no vacuum port. When I tried running the 19lb injectors it was too rich before boost kicked in. I'm hoping to get the controller with the vacuum port so I can get the 19lb injectors dialed in. The turbo will run fine on stock injectors and 6 lb boost. I'm trying to run 10lb boost, and I know there's more power there than what I can get because it goes lean (17~18 on the AFR gauge) at 10lbs with stock injectors, EJK max injection.

Dedub, how is the vacuum ported fuel controller working for you?

mine is working good with stock injectors i got all fuel i need an more.
Link to comment
Share on other sites

So are you the one to talk to about getting the vacuum ported fuel controller? How much are those going for?

$300.00 the are programed to work with stock injectors. if you put bigger injectors in it will over fuel off bust. it will have to be reprogramed for the bigger injectors. just so everbody knowes up front. thank
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By doncaron
      Hello everyone! 
      First of all I would like to thank you for the help with my timing problem, it was the chain. Now I’m looking for the part number for the wet clutch baring.  I’ve been looking for it but my side by side is a 2022 t-boss 550 and it’s not the same as a 2021. Can anyone help me please?
      thank you in advance again. 
       
    • By Mark T
      MY 400 is gutless. I would like to know if I can upgrade to a larger engine ?
    • By Randyh79
      Does the transmission share the crank case oil with the engine or does it have its own oil seperate from the engine?
    • By lonerider98
      At the end of last year my Coleman UT 500 will not go into reverse. I can hold it over toward the reverse to move it nut it won't lock into reverse. Anyone have this problem? Winter is just about over and going to have to get this resolved. Thank You!
    • By Hugh
      My 2018 Hisun sector crew engine cut off after about 15 minutes run. There is no indicator of what is wrong, no error code just die and won't restart until it cool down. I notice that the fan is not running but the temp indicator is on low temp, no overheat indicator. I checked the radiator fluid, it is cool to touch.
      Cooling fans are working, I can hear it running once awhile if I can get the engine warm up enough.  Thank you for all the help.
       
      Hugh



×
×
  • Create New...