Quantcast
Jump to content

Renli - 4wd not working


nando87

Recommended Posts

As of recent my 4wd stopped working, when turned on it comes on when it wants to or doesn’t come on at all.

When trying to climb something in 4wd you can hear a loud click/clung every little bit, I assume it’s the 4wd trying to engage. Sometimes it comes on/off/on/off all during one hill climb.

Any thoughts/suggestions?

Link to comment
Share on other sites

assuming Renli has the same front end as a trooper,here's a few possibilities

1 could be a bad switch or connection not supplying power. do you hear the motor in the box run for a second or 2 every time you switch it?

2 the black box that's bolted to your front diff has water in it, remove it, stick a nail or something in the hole and activate, see if it moves in and out, open it up and inspect. report finding, how much water have you been in?

3 the teeth of the gear that slides over the other gears to lock in the front may be worn and have a burr on then on them, you may have to open up the diff. do 1 & 2 and let us know what you find, photos help.

May I suggest you fill out the profile so we can get to know you better, maybe there's some one just a block or two away that would want to help you.

Link to comment
Share on other sites

assuming Renli has the same front end as a trooper,here's a few possibilities

1 could be a bad switch or connection not supplying power. do you hear the motor in the box run for a second or 2 every time you switch it?

2 the black box that's bolted to your front diff has water in it, remove it, stick a nail or something in the hole and activate, see if it moves in and out, open it up and inspect. report finding, how much water have you been in?

3 the teeth of the gear that slides over the other gears to lock in the front may be worn and have a burr on then on them, you may have to open up the diff. do 1 & 2 and let us know what you find, photos help.

1. When you say hear the motor in the box run what do you mean, the black box bolted in front? After being in 4wd for about a minute the black box starts beeping really loud. When I shut it off it goes away and if I put back in 4wd it comes back after a minute.

2. I just put a new black box on my Renli last week hoping that was the problem, didn't seam to help.

3. This will have to be my last resort, I don't want to open the diff.

Link to comment
Share on other sites

The Renli's have 2 electronic parts to the 4wd system, one is a little black box that sends the signal to the electric motor on the diff. When there is a malfunction with the 4wd the box "beeps" to let you know there is something wrong.

I replaced the box that send the signal, that didn't solve my issue. It is most likely the electric motor on the diff, when I put it in 4wd the motor doesn't do anything or make any sounds so I'm assuming it's dead or only works sometimes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
    • By Robert B
      Going down a 20 deg hill engine is holding UTV back. Then something releases like going into Neutral and makes a loud clacking noise. Have to use brake to slow UTV down. Then once level it shifts back into gear. Have done shift extension does not pop out of gear.
    • By johnpeter
      2023 Can-Am Maverick Sport XMR 1000R RED TITANIUM On Ebay
      https://www.ebay.com/itm/156096225938?

    • By johnpeter
      2023 Can-Am Maverick Sport XMR 1000R RED TITANIUM On Ebay
      https://www.ebay.com/itm/156096225938?

×
×
  • Create New...