Quantcast
Jump to content

Tie rod ends

rwwiefer

By rwwiefer
in Joyner UTV SxS Forum

 Share

Recommended Posts

rwwiefer Contributor

rwwiefer

Posted
Posted

Searched some for this but not seeing what I'm looking for. I have a 2006 Commando 650, I just re tro fitted a Polaris Razor rack and pinion in it and need to change the tie rod ends. What I would prefer is changing them to SAE threads. The Razor rack is set for 5/8" bore heims which I have and I can make my own aluminum tie rods from scrap tubing. I have all sae taps so that is why I prefer changing the tie rods ends to sae. I thought about drilling the spindles and using heims there as well but I think I need to keep the higher height of the tie rod ends to keep my Bump steer to a minimum. Once I get this complete I will post some pics of the rack and how I mounted it. It appears I will sure improve the turning radius.

Link to comment
Share on other sites
Kinarfi Veteran

Kinarfi

Posted
Posted

Keep an eye on the CVs that they don't start binding as you get tighter turn radius' !

Jact the wheels off the floor with jack as close to the wheel as you can get, turn your wheel hard right and hard left hold it there while you rotate each wheel and feel for little bumps caused by the CV binding. It's my guess that you already have all you can get.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • AlaskaTrail
      2021 Coleman UT400 - Transmission fluid change
      By AlaskaTrail
      Hi All,
      New to UTVs and recently accuired a ut400 from our local Alaska Commercial Co. and had a questions regarding the transmission fluid. I have had a squeeling noise, sounds like a teapot, that recently started after being driven for a few minutes. The manual says to change the fluid at 500 miles, so I was thinking maybe its just time for this to be changed. Other then that I cannot find any information regarding the type used. While reading through these forums, I seen someone put that the transmission is lubricated with the engine oil. Is this true? If not what should I be using and where can I find the information to change it out? Any input on this would be greatly appretiated!
      Thanks in advance
    • nods
      2022 sector 750 GAS powered: Codes E-113, E-108, E-123, E-132, E-650. What are these?
      By nods
      Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
    • MJG
      Looking to Purchase 2008 Joyner Renegade
      By MJG
      Hello, 
      I found an 08 Renegade for sale and looking to purchase it.  I haven’t heard too much about these machines and any insight would be much appreciated.  Are they good machines?
    • LindaCall60
      Need manual for teardown and rebuild 2011 hs 500
      By LindaCall60
      Purchased a 2011 bighorn banchee. Needs motor work. Not sure what. Husband is mechanic but not computer savvy. So, is there a manual that will tell him how to tear this down?  We have down loaded a service manual, but he says it doesn't tell him what he is looking for. 
    • johnpeter
      2016 Polaris Ranger 570 4WD
      By johnpeter
      2016 Polaris Ranger 570 4WD On Ebay
      https://www.ebay.com/itm/166657642388?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...