Quantcast
Jump to content


Hello I have 650 commando rear differential.

silverbullet

By silverbullet
in Joyner UTV SxS Forum

 Share

Recommended Posts

silverbullet Experienced

silverbullet

Posted
Posted

Hello

I have just recived date of first delivery of 650 differentail.We have taken these rear differentails apart and re shim them and installed new upgraded hardware.They will be shipped out :rolleyes: starting 7/25/15.

Thanks Silverbullet

  • Like 1
silverbullet Experienced

silverbullet

Posted
  • Author
Posted

Silverbullet

No we do not sell renegade rear differential.Which will run the front differential.These are the Joyner 650 rear Differential.As i said we are going to disassemble unit re shim and install heavy duty hardware.These are made from vender who make them for Joyner in China.Check out our website

Thanks Matt

  • 1 month later...
  • 1 year later...
silverbullet Experienced

silverbullet

Posted
  • Author
Posted

are those the diffs people were putting in the trooper

No the trooper rear differential.We do the Lenny up grade plus a few other modifications.On all the differential we get from China has gotten better Trooper but we find small mistakes.We up grade the hardware to 12.9 with nuts.We tig the pin and a few other things.

silverbullet Experienced

silverbullet

Posted
  • Author
Posted

silverbullet

The 650 are a complete other thing.The back lash is way off and can not be made great.We up grade the hardware and shim the pinion and ring gear to the best we can.We sent out ring and pinion to a test facility to see if they were harden properly and were strong so they did a pull test and they were ok. We have sold about 60 units with a 2 come backs.Vary hard to find them they want a big order of 20 unites doesn't work for us.So we are just constantly looking for them.We have a lead lets hope it pans out.C/v axles are easy to get we have some in stock.

  • 3 weeks later...
silverbullet Experienced

silverbullet

Posted
  • Author
Posted

silverbullet

We have ordered some rear deferentials. Trooper,Renegade,Commando.Will all be up graded buy us.Including Back Lash new 12.9 hardware with nuts.We tack weld the pin in place and make sure every thing is up to spec.No other dealer dose this and they charge more money.Some times we have a 10 to 20 day wait.Some times so be aware.

  • 1 year later...
Wanda Williams Newbie

Wanda Williams

Posted
Posted
On 7/8/2015 at 3:04 PM, silverbullet said:

Hello

I have just recived date of first delivery of 650 differentail.We have taken these rear differentails apart and re shim them and installed new upgraded hardware.They will be shipped out starting 7/25/15.

Thanks Silverbullet

I would like to get a quote for one of the Joyner cammando 650cc rear differential. Please

Wanda Williams Newbie

Wanda Williams

Posted
Posted
On 8/18/2015 at 1:14 AM, silverbullet said:

silverbullet

We will price match any advertized price.On parts in stock. Buy from US dealer.We due 6 month financing thru.PayPal.

Thanks Matt

I would like a quote for a spiral bevel gear rear and pinion rear differential. Thank you. 

  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • Ed Michael
      Older Landmaster LM 650 Fuel Problem
      By Ed Michael
      My older LM 650 is blowing fuel into the air cleaner.  Any idea on what would cause this?  It is the Suzuki motor.  Not sure what model year it is.
      Thanks
      Subaru SxS.mp4
    • GunnersTacklebox
      2022 Sector 750 EPS starting issues
      By GunnersTacklebox
      Hi All,
      New here, but bought a 2022 Sector 750 brand new last march (old stock up here in Canada)
      It's a good bike so far, but I have noticed a quirk and was wondering if anyone else has had a similar issue?
       
      The issue I've had is if I leave the utv parked on any incline, not even a major incline, and leave it to sit for a while (day or two) it will not start properly. It will turn over and not fire until I press the gas pedal, when it will run and rev up, but if I let off the gas it will die. It will keep doing this until I either start it in gear and drive it for a bit or leave it in neutral and roll it down the hill to flatter ground. where it will have to sit for a while. 
      If I park it on a decline there is no issue. fuel is not low, it's occurred a couple times now. 
       
      Any thoughts on the cause of this? Dealership just says bring it in and let them take a look, at my expense of course. 
    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...