Quantcast
Jump to content


Joyner help!

giericd

By giericd
in Joyner UTV SxS Forum

 Share

Recommended Posts

giericd Rookie

giericd

Posted
Posted

Hi guys I need help. I searched every where and can't find the answer on line or in threads. I have a 2006/2007 joyner mini viper 800cc fuel injected  chery 3 cylinder. A gear is chewed up in the transmission and I can't find parts. I live in south Florida and we don't have the dunebuggy following as out west so parts and knowledge are hard to come by. It looks like the chewed up gear is part of the shaft everything else looks fine. Wheee can I locate a replacement? Is it true that the internals are the same as some John Deere's? I've read everything from ford escort transmissions to John Deere to suzuki samurai transmission will fit. I don't need maybe I need to know what will work! Thanks in advance

IMG_6808.JPG

IMG_6809.JPG

silverbullet Experienced

silverbullet

Posted
Posted
21 hours ago, giericd said:

Hi guys I need help. I searched every where and can't find the answer on line or in threads. I have a 2006/2007 joyner mini viper 800cc fuel injected  chery 3 cylinder. A gear is chewed up in the transmission and I can't find parts. I live in south Florida and we don't have the dunebuggy following as out west so parts and knowledge are hard to come by. It looks like the chewed up gear is part of the shaft everything else looks fine. Wheee can I locate a replacement? Is it true that the internals are the same as some John Deere's? I've read everything from ford escort transmissions to John Deere to suzuki samurai transmission will fit. I don't need maybe I need to know what will work! Thanks in advance

IMG_6808.JPG

IMG_6809.JPG

Please send to my email [email protected] the gear that is bad.Also move back a littel for the transmission

Alex

Alex

Posted
Posted
8 hours ago, giericd said:

It won't let me upload any more pics, it's the gear at the bottom of the shaft on the top right, the one with the larger black nut on top

I changed some of our settings, so you should not have this issue with uploading attachments in the future.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • Gerald Dillman
      2008 Joyner trooper transmission parts
      By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • Wolfpaak
      Identify this part help needed
      By Wolfpaak
      I think this part is causing a high idle problem(4000 rpm at start up) in my 04 R4 Joyner. I took it out and cleaned it and the problem went away. I just went out to start my SXS and it's idle jumped up to 4 grand again. Can someone tell me what this part is called so I can search for a new one. Or can you point me towards a source. 
      Thanks in advance. 
      Kenny


    • Ed Michael
      Older Landmaster LM 650 Fuel Problem
      By Ed Michael
      My older LM 650 is blowing fuel into the air cleaner.  Any idea on what would cause this?  It is the Suzuki motor.  Not sure what model year it is.
      Thanks
      Subaru SxS.mp4
    • Jon Spruill
      2018 Hisun Sector 1000 Crew stalling but starts right back up. Please help!
      By Jon Spruill
      Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...