Quantcast
Jump to content


Recommended Posts

Posted

If you would like, post year and model and I'll look down here for the parts you need. Post a picture if possible.

I was told by one of the company's higher ups that all was U.S. built except the engines. Sad to find out different. 

Posted

I don't know the exact year but about 7 or so years old, Trail Wagon, with 653 Subaru engine (which is good). It's not made to go fast and you don't want to, steering is sloppy. For off road on bad washed out rocky/muddy trails it is slow but gets through it all. A shame there is no guard for the rear transmission with alloy housing. If it was not for the lack of parts and/or expensive assemblies  I'd keep it.

101_1666.jpg

  • Like 1
Posted

The seat is not original, this one softens some of the bumps. Original seats have soft foam that sinks to the plywood base when sat on providing NO cushion.

I've seen better seats on 12 foot aluminum boats.

Posted

I did find a part that worked, a Polaris gas shock. Had to make the thread diameter smaller to fit the mount.  Landmaster only sells the complete strut assy. and the left side they are out of. Stut assy. is $380, way too much when you just need the shock. Bought the shock for $100. You can see it in the photo, the only "clean": part.

  • Like 1
Posted

After reading all this and doing more research I'm looking around for a new to me buggy. Sure seems folks are proud of them at the price their asking for used stuff.

Posted

No one likes to lose their $$. Just ask yourself why are they selling when their Sportworks is in good shape. It's been more than once I hit a bump and my head smashed into the roof! Those 4 rear shocks each with a coil spring don't help ride quality but do help hauling heavy loads.

The seats are a rectangular piece of plywood with some soft foam and black vinyl stapled to it. I could make better but bought a seat with high density foam that absorbs bumps, greatly helped comfort

Posted

We built new seats within a week of getting it. Bottom was worn out and the back was missing. Wondering if one shock on each side was removed if it would help the stiff ride.

   By the way, I traded a Kawasaki Bayou 250 that we never rode for the buggy.

Posted

DON"T remove the shocks, just setting them on their lowest setting makes the buggy tippy. I tried disconnecting a shock on each side, not good.

It needs an independent rear end, which isn't worth redesigning it. Has an odd setup with a side bar and U shape with bottom of the U attached to the cab frame.

  • Like 1
Posted

Thanks for the advice. It will keep me from screwing up. I'm afraid if they made all the improvements it needs it would be priced up there with the big boys.

Posted

Landmaster still has the rear shocks with springs available, not that you want more.  Don't stress the front wheel drive, those axles are narrower under the CV boot and will snap. I've broken both sides without trying. Without measuring the spline they only measure 1/2" maybe a bit more, why the axle that you see is thicker is a mystery.

Posted

I have a large buck in the woods here but he never breaks cover, gets behind my tree stand and blows showing his discontent that I'm hiding up in a tree.

That's why he's a big one. Seen his tracks.

  • Like 1
Posted

Took the Sportworks hunting moose in Quebec and it got through all the washed out trails. Had two moose hanging at the cottage we rented. The main building down the road has rooms and caters to foreign visitors, mostly from France. Well a group came walking up the dirt road by our cottage and saw the moose and 4 wheelers. They took photos like they never saw a 4 wheeler before. Two of the men wanted their photos holding the moose head. After they did this there was bloody guck on their clothing but they were enjoying this too much to care.

  • Like 1
Posted

Once I built a tree stand 20 feet high and put apples out before and during season I can get a deer the first morning of season. Last season I waited and watched them in front of me for a couple days. The big one did his thing and came behind me and blew just to let me know I wasn't getting him.

Posted
6 minutes ago, vaughn said:

No, not yet, anyway. But I will keep trying. It gets a little cold here but no snow. Of course it will get hot again within a few days.

Same Here in Texas!

Posted

Recliner, I could but takes the fun out of hunting. I have a stand about 300 yards from the house. a short trip to the freezer. The UTV sure helps, if it's a big one just winch it in the dump box.

Posted

I hunt on a lease we own, not a deer lease but we run our cows on it, about 200 acres, probably about 120 acres of pasturland, rest is woods, and 2 creeks that run through it, Anway i have a trail cam , anyway, whenever i put it out over there, the cows, everytime, come down and bed down in front of the camera, IT NEVER FAILS!!

Posted
Just now, Travis said:

 about 200 acres, probably about 120 acres of pasturland, rest is woods, and 2 creeks that run through it, 

Sounds like a sweet set up.

Posted

35 feet is up high!!  Must have a great view.

I've got about 140 acres mostly woods/bush with some open areas. In most spots if you dig down 2 feet you hit limestone.

Deer love the trails I've made. Haven't tried my trail cam yet need an SD card.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Popular Now

  • Similar Topics

    • By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • By Kyler
      Put new fuel in this thing, new battery I can get it to turn over but want stay running it’ll try to run with starting fluid but shuts right back off what could the problem be?
    • By Dave MM1 SS
      Given the current winter we're having, I was looking to add a plow to my L5.  I got on the Landmaster site and ALL of the plows are listed as discontinued!  I called and they said that they're in-between vendors to make em.  Cycle Country usta make em, got bought by Kolpin, yadda, yadda ... can't find one.
      Anyone know of or tried a universal plow/mount that'll fit a Landmaster SXS?
      Thanks,
      Buried in PA
    • By malenurse13
      We've had the Predator 459cc on our American Landmaster TW450 for about one month now. And I've got to say, this has been a solid motor! My kids have really put the motor and the whole side-by-side to the test. But it's running great! The original motor was a Kohler ECH440 with 14hp.
      We've had ice and snow all weekend. But we can feel the extra power with the Predator 459cc (15.8hp). Just wanted to let y'all know, if you're looking for something to replace your motor on the TW450... We considered the cheaper Predator 420. But I'm really glad we got the 459!
       


    • By Alien10
      My 2021 Coleman Outfitter 550 has a rear hitch receiver.  It works OK for my towing of junk around the property BUT it is NOT welded directly to the frame of the SxS. Instead it fits into a sloppy tube and is pinned in there by a 5/8" hitch pin.  This allows the receiver itself to wobble around to a small degree which can be annoying in some circumstances especially if towing and backing a trailer, it can droop or sway side to side by an inch or two at the ball. .   I cannot figure out why they set up the hitch in this way, and am considering welding the tube directly to the frame as found in most hitch arrangements.
      Has anyone else found this annoying and welded the tube up to the frame?  If so, where there any down side to doing so?  (Broken frame etc. ??) 
×
×
  • Create New...