Quantcast
Jump to content


2007 trans 3010

Matthew Hencinski
 Share

Recommended Posts

Matthew Hencinski Newbie

Matthew Hencinski

Posted
Posted

Newbie here. Picked up this machine at a auction. It fell into ice and spend some time under water. Lucky for me it was cold and it froze quickly. After lots of fluid changes and minor repairs it has been solid for 10 hours of use.  Anyway few questions

Does this machine have brake lights and tailights?. If so where is brake light switch

Anyone have location of horn and relay?

Does overheat light come on when key is on?

Where is parking brake switch for light on dash?

 

I will say this thing is well built for tough work.

 

Travis Grand Master

Travis

Posted
Posted

Yes it has brake lights and tail lights in one.  It should turn on when you flip the light switch, and the brake light comes on when you press the brake pedal.  Most models have a spring attached to the pedal  that goes to a switch just above the pedal.  

 And as far as i know, they don't have a horn,stock unless one is added .

14 hours ago, Matthew Hencinski said:

Does overheat light come on when key is on?

 Do you mean while the engine is running, or just when you turn the key  to the ON position? because the key has 3 positions. Off, On and Start (Engine).

Welcome to the board and Congrats on your purchase of a great machine.  If you need any parts look here: https://www.kawasakipartshouse.com/oemparts/c/kawasaki_utility_2007_prior/parts

 

  • Like 1
  • 4 weeks later...
kenfain Experienced

kenfain

Posted
Posted

Mine is an 05 diesel. The only light that lights up before starting is the oil pressure light. Of course yours could be different. I think they went to some kind of onboard computer system soon after mine was built, but I don't know when. So yours could be a completely different machine. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • Prepper
      Which is the best oil to use ?
      By Prepper
      I have been doing a little research on which engine oil is best for UTV engines.  There seems to be some disagreement over using a good quality regular engine oil, and the necessity of using "M2" (or wet clutch suitable) oil.  My understanding is the "wet clutch" suitable oil has less friction reduction properties (hence a more responsive clutch with less slippage).  While less friction reduction properties would seem to be better for the wet clutch... it would not be best for the internal engine parts like camshaft bearings and other moving parts where friction is detrimental and would lead to premature failure.  Some folks swear you need M2 oil, while others say they have been using regular motor oil for years and their clutch is just fine.  Could they both be right ???
      Any thoughts ?
       
    • Paul L
      Kubota RTV-XG850 Sidekick shifting into nuetral problems
      By Paul L
      When I am driving at 30 to 40 mph on the highway, the display will change from H (high) to R (reverse).  It does not actually shift into reverse, it seems to shift into neutral and starts losing speed and the gas pedal has no effect.  After the rpm/speed drops for 5 seconds or so, it changes back to H and runs fine for another minute or so.  You have to try to drive it at less than 5000 rpm or so, to try and keep this from happening.  Any ideas on what the problem might be?  It only happens at the higher speeds.
    • Matthew Smith
      SXS No Crank at the Key and No Spark
      By Matthew Smith
      2013 Bennche Bighorn 700 EFI
       I just picked up this project that I was told would crank, but not start.  This is what I’ve figured out so far….
      I installed a new battery and get all dash lights, head lights, and brake lights on when turning the ignition on.  Fuel pump even turns on.  It does not crank with the key, but would when I jumped the starter solenoid, so I replaced it…..no change.
      Figured I’d check for spark and compression while I was dorking around.  Compression is 150 psi, but there is no spark.  Replaced the spark plug… no change.
      So, is my new starter solenoid bad?  Could it be the brake or gear position switches even though the brakes and neutral lights come on?  Not sure where to go from here.




    • rdborra
      Bobcat 2200 dump bed relay pops fuse and stalls after warm
      By rdborra
      I had to remove the relay for the dump bed due to it popping the fuse for main key power. I have tried to find a short but nothing seems to out of normal. I also disconnected the dump motor and switch and still pops the fuse. Also, when the machine is warmed up i get about 5 to 10 of work out of before it stalls. Once I can get it to start again I have to use the choke to keep it running. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...