Quantcast
Jump to content


Recommended Posts

Posted

Hello, I’m writing this because I desperately need some assistance with front axle for kubota rtv 900 2000 model.

My stepfather told me his two front axles of his  kubota rtv broken separately yesterday and he couldn't distinguish which is for left or right.

Are left and right front cv axles the same on a 2000 kubota rtv 900 4x4 ? And what's the cost of kubota rtv 900 axles ?

I don't learn much about kubota rtv and hope someone tell me.

Thank you.

  • 4 months later...
Posted

I know it's very late to reply but I still want to share my experience here,maybe it will be helpful to others.

What I have is 2012  kubota rtv 900 and one of front cv joint axle (Driver side)was worn out.

So I went to the kubota dealer,  they told me the front cv joint axles of 2009-2014 RTV 900 4x4 are the same and wanted to charge me $200 for a new one.

I think it's very expensive so google  cv axle replacement cost online when I got home.

What I found it's between $50-$70 for a new kubota rtv 900 cv axle replacement, for example,Hex Auto Parts has kubota rtv front axle for sale ,only $60 free shipping.

Much cheaper and save me a couple hundred dollars.

Finally I got my axle for my 2012 kubota rtv 900 and install by myself in two hours.

Now I am waiting for spring and really want to ride my rtv 900 when the weather warms up.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By paul allen
      right front axle cv joint boot keeps getting torn up from the inside out....the stock one was damaged from a stick...i have replaced  the axle 4 times with aftermarket axles that fit fine..after 4-5 miles of riding even on grass.the outer boot get torn up from the inside out...all 4 brand new alxes...bearings are fine nothing bent everything fits just fine....nothing seems to be binding.....any thoughts?????
       
       
      thanks...pa
       
    • By Garjess
      My rtv 1140 won't turn over.  I've jumped the neutral switch, and the brake switch, and checked the ignition switch. I'm not getting any power to the trigger wire on the starter solenoid.  It starts fine with the key on and putting power to the trigger wire on the solonoid.
      Does a 2010 RTV 1140 cpx have a starter relay? 
      Does anyone have a wiring diagram?
    • By fikey
      I am about 6 months in to owning my 520. It is used mainly to run back and forth to our barn and shop. Occasionally, I run it up and down a few fairly steep hills on the property. One day, as I was going up one of the hills, the motor started sputtering and a tremendous amount of smoke was coming out of the exhaust. I was near the top and it made it (sputtering) up. Once back on the flat, I made it home. I loaded it on the trailer and took it back to the dealer. They said they checked everything out and found no issues. Over the next month or so, I only had occasion to go up hills once or twice with no issue. Then one day, again as I was going up a hill, the engine sputtered, giant plume of white smoke and then the engine died. 30 seconds later, started up and made it to the top. Repeated the route (down and up) and the same thing happened again. Called the dealer and their head of service said he would come out and wanted to see it first hand. He came out a few days later and repeated the route several time and it never happened with him in it. I had videoed the whole thing on one of the times it happened to me, but since it happens intermittently, could not produce it when he was here. I told him that I had checked the temperature, the oil level and the antifreeze level after each occurrence and they were normal. I asked him to call Kubota and ask what the possibilities were and that I am not fond of it dying on the hill and blowing the smoke and I didn't want to wait until something catastrophic happened to figure it out. When I followed up, they had no answers (which doesn't exactly please me). Any ideas? The attached photo was the start of the smoking. Didn't know how to upload the video of the whole thing, but it fogged the whole area.

    • By brewski
      I just purchased a 2025 kubota rtv 1100 x cab esd esnting to install light bars on the roof it appears to be prewired for lights how do lights mount and what kind of switches do i need
    • By Jody Deville
      I’m looking to best place to buy replacement axles for the rear in my buggy. Both axles are bad. Where is the best place to find them?
×
×
  • Create New...