Quantcast
Jump to content


Recommended Posts

Posted

New to this. I am looking to pick up a used side by side for our property. It is a little over 18 acres, 15 of which are woods. I need something with a good hydraulic bed. It will be used primarily for chores and hauling wood on the property. I’ve looked at Polaris and Kubota (diesel). Reliability is key as is cost. Is the 570 large enough for hilly woods? Plan to spend around $6000 . Also, how many hours is too many?  Thanks 

Posted

I wouldn't be comfortable buying one with 700+ hours, mainly since I don't know how regularly maintenance was performed. It really does boil down to how well it was taken care of. If you Are looking at a used unit from an individual look at the color of the oil, don't want it to be dark/grey.

 

Posted

I will add I have seen older Kubota utility vehicles for sale and running great with 2000 hours +,  the Kubota will probably have more torque since most are diesel, so it could haul more, especially on hills.

I don't know a lot about Polaris, but I do know they have the most recalls per 100 vehicles than Kawasaki,Kubota, others.

Posted

I've used the Kubota for a few hours. It has some nice features, good power. I'd recommend it. The one that I used had a high, low, and mid range. My mule only has high, and low. If I had it to do over, I'd definitely choose the Kubota.

  • 3 weeks later...
Posted

My Scag mechanic has traded for a 2008 Kawasaki Teryx 700 with 525 hrs. He is going to tear it down and replace needed parts. He is very reliable and will not sell it until he thinks it’s right. He is expecting to sell it for about 3500 to 4000 when it is ready. Any thought would be appreciated. It has new tires. Thanks

Posted

If the reviews are favorable, I'd Google "2008 Teryx 750 problems"  followed by maintenance issues etc. That way you can see if some unforseen problem might possibly be lurking right there waiting. 

That doesn't mean that you'll have any problem, but it gives more knowledge. Most reviews are done on new machines, that haven't had time, or elements working against it yet. Really only covering performance, and capabilities. All good things to know, but if a maintenance nightmare awaits, I'd want to know that as well.

There should be plenty of information available about a 2008 machine. So you'll probably get all the information you need. And honestly, if it's in good shape, that's probably a fair deal. As I remember, the Teryx was a pricey machine, small, and fast. Geared more for fun, than work. Kind of a side×side version of a 4 wheeler. Either way, if it has a trailer hitch it'll be okay for light duty. And one thing I've learned on this forum, is that parts availability is a big plus. 

If you do buy it, be sure to get a shop service manual for it. Or for anything that you do get. Those manuals are pure gold, and together with the internet, can solve most problems.

  • Like 1
  • 3 weeks later...
Posted
On 9/3/2019 at 12:19 PM, KJ2654 said:

My Scag mechanic has traded for a 2008 Kawasaki Teryx 700 with 525 hrs. He is going to tear it down and replace needed parts. He is very reliable and will not sell it until he thinks it’s right. He is expecting to sell it for about 3500 to 4000 when it is ready. Any thought would be appreciated. It has new tires. Thanks

I’ve settled on the Teryx for 3500. Runs great, cosmetically fair. Appreciate the comments that ultimately helped me feel more confident in this purchase. Any more advice about the Teryx or off-roading in general would be appreciated. It will mainly be used for helping around the property and riding back in our woods. Experiences opened up trails would be really helpful. Thanks again 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By jertex
      I bought a 2017 Stampede 900 last fall that was new, old stock with less than 5 hours on it thinking that I would be getting a relatively trouble free UTV as compared to buying a used Polaris or CanAm, or Honda, etc. It's been a little quirky, but reliable. What I thought was just a minor issue with this model, the difficulty in shifting between R, N, L, H, etc., was just a characteristic of this model is now a big problem. I had to climb two very steep trails to get to the upper meadow of our hunting property, which seemed to stress the UTV more than usual since I was carrying some lumber to work on a platform for a hunting blind, and when I went to shift into park, I felt something give and it would not shift out of low, but it did move up into high gear.  I couldn't get it to shift at all at that point and the shifter felt mushy for lack of a better word. I was able to get it down to the lodge and when I investigated, I discovered that the straight, metal tube portion of the shift cable had bent to almost 90 degrees (see pics). I'm positive that it had already had some deformation that had happened previously and it had the right amount of resistance to bend to the point where it was unusable. 
      I have two questions:
      1. I suspect that there must be some other issues that makes this UTV difficult to shift, and I'm wondering if this is a common problem and if someone could enlighten me on what could cause this to be difficult to shift?
      2. Have any of you had this happen and if so, how difficult is it to replace the shifter cable?
      Any other advice is welcome, this is the first UTV that I've ever owned, so I don't know much about working on these or maintaining them. I'm relatively capable when it comes to working on my own vehicles in general, and I'm not afraid to take things apart and get my hands dirty.
      Thanks in advance for any insight, I'll be traveling most the day so I won't get a chance to look at replies until this evening.


       
    • By Firewalker918
      I have a 2021 UV34XL and I am kind of looking to change it up from the orange wheels and maybe do a wrap?  Please share photos of any XLs that has been modified to look better and any seat covers recommended.thanks
       
    • By mehe
      Hi everyone and I hope that is not a too forward questions for us newbies. 
      My husband and I are ready (next Spring) to open our newly developed nudist campground in Iowa and we are now looking for interesting activities to host. 
      Don't worry we are not going to try and sell you a membership because as of 2 weeks ago all of our 50 campsites are sold out for the 2024 season. 
      It was my job to sell site and now that is complete i am looking for interesting actives host for weekend. 
      We have 300 acres of woods, grassland, swamps and 2 small ponds/lakes and dozens of miles of riding trails.
      we have gotten county approval for the complete 300 acres to be clothing optional. 
      We think we have a great spot for a weekend or several day ATV / mudder event. 
      Clothing would be optional for all participants and plenty of room for overnight camping and outdoor group showers. 
      Now we are looking to you pro  ATV riders to let us know if you think your group of people would fit in with ours. 
      Feel free to ask anything you would like to get a better idea of what we offer.

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
×
×
  • Create New...