Quantcast
Jump to content

2016 Cub Cadet Challenger Crew 750 Help Needed

Nazary Vasilchenko
 Share

Recommended Posts

Nazary Vasilchenko Rookie

Nazary Vasilchenko

Posted
Posted

Hi everyone, I’m new to the forum and was looking to get some help from anyone that has the same UTV as mine. 

So I just picked up a 2016 Cub cadet challenger crew with eps. It’s needs work, the guy that I bought it from completely took the machine apart due to needing an engine rebuild, but he also took off some spare parts to keep for his other machine. So basically I’m missing a few electronics, I think I’m missing a relay box and ecu but I’m not sure. I’ve looked everywhere on the internet for some pictures under the hood and can’t find anything. I’ve found part schematics but some of the pictures are not clear.

Can someone please open up their hood and post a few pictures of that area? There are a few bolt locations but I can’t find what goes there. It would really help me out. 

Link to comment
Share on other sites
  • Alex changed the title to 2016 Cub Cadet Challenger 750 Under-hood Pictures
  • 5 months later...
Nazary Vasilchenko Rookie

Nazary Vasilchenko

Posted
  • Author
Posted

Sledge, sorry for the late response, but thank you for the picture, it really helped me out.

I'm almost done with this project but realized that the previous owner for some reason cut the grey pigtail that goes to the ecu in the back off. I bought a new pigtail but the colors are different. Can anyone take a picture of the gray plug from the engine harness that plugs into ecu? It's under the back right seat. BTW, I cannot find another harness that's why I need to solder a new pigtail. I would appreciate any help, thank you!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • buckrub
      trying to finish assembly "new" 2021 Coleman ut 400
      By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • Ermd ttk
      UTV Odes Ravager 1000cc - Strange noise from the back
      By Ermd ttk
      Hello friends,
      I got my ODES Ravager UTV yesterday and after a couple of hours of driving when I go downhill I heard a strange loud noise a couple of times, like a gear skipping or maybe something from the differential.
      It doesn't always happen and when it does it is heard for a few seconds and then it goes away and everything works normally, I'm worried if there could be some major malfunction or what could be the problem if someone can help me?
      Thanks a lot.
       
    • hdtran
      Hello from New Mexico!
      By hdtran
      Hy (pronounce he), just bought a Hisun Sector E1.
      I'll be using it to haul logs and stuff in the Sangre de Cristo mountains.
    • Nathon S.
      Bennche 700 EFI Bighorn New Fuel pump not working
      By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
    • Hugh
      2018 Hisun Sector Crew 1000 engine die after about 15 minutes run
      By Hugh
      My 2018 Hisun sector crew engine cut off after about 15 minutes run. There is no indicator of what is wrong, no error code just die and won't restart until it cool down. I notice that the fan is not running but the temp indicator is on low temp, no overheat indicator. I checked the radiator fluid, it is cool to touch.
      Cooling fans are working, I can hear it running once awhile if I can get the engine warm up enough.  Thank you for all the help.
       
      Hugh

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...