Quantcast
Jump to content


2013 Hisun 800 Wiring Help

justingrider

By justingrider
in Hisun UTV SxS Forum

 Share

Recommended Posts

justingrider Rookie

justingrider

Posted
Posted

Good morning everyone, appreciate any help on this.  I picked up a 2013 Hisun 800 for a project.  Previous owner had fried a lot of the electrical with a bunch of aftermarket audio equipment, so I have been replacing all of the wiring to give it a fresh start.  I'm 95% there with a couple of plugs I can't figure out where they need to be routed and the reason for me reaching out for help here.

1.  A female 2-port white plug that comes off the end of the main harness, close to the side where the terminal hook ups tap into the battery.  It has a Blue/black-stripe wire and a White/blue-stripe wire. (Pictures: https://ibb.co/m9PRDqX and
https://ibb.co/9pHZsFj). I'm assuming it is another single offset fuse or module like the other pieces around it but can't find anything on what it might be or that wire color combination in the manual/wiring diagrams...anyone know what this guy goes to?

2.  On the crank position sensor (torque sensor), the wires that I have coming off of that are a green wire and blue/light-gray-stripe wire (https://ibb.co/FmJLJfs)...any idea on where this guy is suppose to plug in to?

Again, thanks for any help you can provide!

-Justin

 

IMG_20191111_071958.jpg

IMG_20191110_181254.jpg

IMG_20191110_203453.jpg

  • 2 months later...
  • 5 months later...
Steve Varao Rookie

Steve Varao

Posted
Posted

Are you still trying to figure out the wiring?  I have a 800 as well and am trying to trouble shoot a no spark problem.  Let me know, the harness on my car is all connected except one mistrey plug.  Maybe we can shoot some pics back and forth and help each other out.

justingrider Rookie

justingrider

Posted
  • Author
Posted

Hey Steve, I did end up getting everything running.  Turned out my no spark issue was due to the voltage being too low from a replacement battery.  After getting a different battery it all started firing.  

Glad to share some images back and forth to help troubleshoot once I get back to the house this weekend.  

Steve Varao Rookie

Steve Varao

Posted
Posted

I got some pics for you to take a look at.  The pics are taken from the front driver side.  It took the pics from far to close, if you look close there is a with pigtail coming off the ECU harness on the right and if you look at the engine you will see a black sensor with nothing plugged in, i cannot find a plug for either of the two.   Any help would be awesome!!!  Thanks Man.

20200703_163651.jpg

20200703_163725.jpg

20200703_163716.jpg

20200703_163714.jpg

20200703_163720.jpg

  • 1 month later...
Steve Varao Rookie

Steve Varao

Posted
Posted

Hi,

Yeah im still trying to figure out the problem.  If you look in the last 3 pics i posted i did figure out that the connector just hanging there is a diagnostic plug.  In the very last pick there is a pic of what i figured out was the oil pressure sensor.  I cannot figure out where the harness connector is for it though.  Can you maybe send me a pic of it?  Also i have been going in circles trying to figure out why im not getting any spark, so far i have replaced both coils, the crank position sensor and the computer.  Ive checked continuity on the position sensor, the coil is getting power, everything is all checking out.  I even removed the stator to look at the metal blocks the crank sensor interacts with.  Im super lost right now, maybe that oil pressure sensor has to be connected in order for the engine to produce spare.  Any help would be appreciated.  Thanks

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Rschrem
      2010 700 Hisun starter issue
      By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • Flanman55
      Wiring issues
      By Flanman55
      I have purchased a used Supermach700 (2008), It runs great after a new choke cable but. The temp sensor on the thermostat house is unhooked and can not find where it plugs back in. The fan has been un hooked from the sensor in the rad and cant figure out how it goes back together properly.  The fan was wired to a by pass switch and i just always leave it on but would like to work it properly. I assume the sensor went bad and not changed.
       
      any help would be great.
       
      thanks
    • BigWave
      2019 hisun won't run
      By BigWave
      I turned off the key and then tried to start it a minute later and it would not start. I changed out the fuel filter and the injector. still nothing. if i have the injector pulled out and close to the hole the injector will spray fuel into the hole and it will run but the minute you put the injector in it will die. any idea's please
       
       
      Bigwave
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...