Quantcast
Jump to content


Massimo 400 sputtering at high speeds

Kevin Powell

By Kevin Powell
in Massimo UTV SxS Forum

 Share

Recommended Posts

Kevin Powell Newbie

Kevin Powell

Posted
Posted (edited)

I have a 2013 Massimo 400 that is sputtering at high speeds with the reverse, drive and temp light flashing.  When I start it in neutral, the neutral light will flash.  I believe it is an error code not sure though.  My apologies if there is a post already on this site.  I'm new at these forums.

Edited by Alex
Topic moved to Massimo forum. Title edited to include issue.
Travis Grand Master

Travis

Posted
Posted

Usually the governor shouldn't make it sputter as the effect of it doing its job, it will just limit the RPMs.I

I would contact massimo with the flashing light to decode it.

It could be spark cutting out due to a faulty plug.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Adrian Domingues
      2023 Massimo T-Boss 550
      By Adrian Domingues
      I have 31 miles on my new T-Boss 550. In order to start I put in nentural and the emerage brake on and push down on brake paddle, then trun ket and get nothing, with key still on I shift to reverase and the back to netural and it starts.  Anyone know what is happening.
      Thanks for your help
    • Eman85
      Best place to find info on Hisun or Massimo UTV's
      By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • mfitzner
      No start
      By mfitzner
      Cranks after installing a jumper wire to ignition switch to get power but will not start
      Have spark and fuel pump runs
       
    • Jeff freeman
      Utv wont start and broken fuel injection wire
      By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • JohnnyB
      Massimo 500 will not start
      By JohnnyB
      My Massimo 500 will not start. I’ve checked all the obvious things. It turns over just fine. fuel, spark, fuse box are all good. I can’t figure it out. Any ideas would be greatly appreciated. Thank you.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...