By Ric Silveira
Thanks for info on spark plugs.
Installed new iridium NGK DR8EIX comes pregapped in my 2021 coleman outfitter 400 also pour in gas tank 8 0z of Seafome
Let me tell you all, 100 % difference found improvement in throttle response, idle, overall performance incredible.
Everyone should do this im so so happy with the outcome
I have a 2011-12 Hisun Yard Sport HS700. Engine gets hot, but radiator does not. Changed the water pump, still the same. Service manual parts #15, 16, & 17 (pages 283-284) shows a "Save Temperture" #15, which looks like a thermostat. Service manual also parts #9, 10 & 11 shows it without a thermostat. Does this unit have a thermostat?
I am trying to find a Scanner that is works for a 2016 MSU500. I found the Tiny Scan TS301 that looks like a decent Scanner but so far have not been able to get confirmation that this works on and older model. It has been stated that it works on the 2019 and newer but not sure about older models. It appears that the ECM/ECU/EFI modules are likely interchangeable between a 2016 and the newer 2019 and on but not sure of the Scanner. I am waiting for feedback from Hisun on this issue right now.
If this unit is not usable for my model year has anyone found and a Diagnostic Scanner for the older machines, one that works and is Affordable?
Thanks for reading my post and any information that you may have to share,
I have a 2020 800 sx with about 16 hours on it. From day one I have heard a clunking noise from the front end going over bumps. Has anyone else experienced this? Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that. Thanks, gary
Similar Tagged Content
By Brad Collins
My side by side always " struggles " when reaching 40 kph. Almost like there's a govender. I cleaned the carb and removed the filter. Always there. The machine was lit up for a couple of months. I still operate it, just at lower speeds. Any help would be greatly appreciated on the issue. Thanks for your time.
Hoping this is correct spot to ask ,
I have 2014 chironex komodo 1100cc
Same engine as trooper 1100
I ended up ordering a new ecu from China and now max rpm is 5100 and 55mph
My factory one was 6300 rpm and 78mph
What rpm limit and speed is everyone seeing ?
Sent from my SM-G930W8 using Tapatalk