Quantcast
Jump to content


2006 Land Pride Treker 4410 need help

Jeff C

By Jeff C
in Other UTV SxS Forum

 Share

Recommended Posts

Jeff C Newbie

Jeff C

Posted
Posted

Hi out there. I have a 2006 Treker 4410  that needs new rear CV axles. I having trouble finding them. Does anyone know if they match to another manufacturer?  Spline is 18 wheel side and 24 on diff.

Thanks

Travis Grand Master

Travis

Posted
Posted

I was able to get a part number for the axles and what other machines they fit.

Land Pride Part #826-456C

REAR AXLE SHFT ST, 24T INT.SPL - Price: Call For Price

This part appears in the following assemblies - click on any assembly to view and order the part:

thumb.php?id=101998&w=100&h=100&zc=1 Manufacturer: Land Pride
Model: Treker 4420ST
Assembly: Transaxle Rear and Axle Shafts
 
thumb.php?id=101959&w=100&h=100&zc=1 Manufacturer: Land Pride
Model: Treker 4220ST
Assembly: Transaxle Rear and Axle Shafts
 
thumb.php?id=101917&w=100&h=100&zc=1 Manufacturer: Land Pride
Model: Treker 4410ST
Assembly: Transaxle Rear and Axle Shafts
 
thumb.php?id=101876&w=100&h=100&zc=1 Manufacturer: Land Pride
Model: Treker 4210ST
Assembly: Transaxle Rear and Axle Shafts
  • Alex changed the title to 2006 Land Pride Treker 4410 need help
  • 7 months later...
Danny R Newbie

Danny R

Posted
Posted

Jeff were you able to find the cv axles you needed? My brother needs the same part and have trouble finding it, German-Bliss apparently doesn’t have it. Anyone know of one?

Thanks, Danny

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • mrpro
      Coleman UT400 rear shock height adjustment
      By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • Firewalker918
      Anyone customized their uv34XL? Also, looking for seatcovers
      By Firewalker918
      I have a 2021 UV34XL and I am kind of looking to change it up from the orange wheels and maybe do a wrap?  Please share photos of any XLs that has been modified to look better and any seat covers recommended.thanks
       
    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • Pop Bob
      Possible trouble point to keep an eye on
      By Pop Bob
      I had been driving for about 15 minutes, everything fine. All of a sudden the engine was surging, losing power, would run with 1/2 throttle or greater and was backfiring badly. Luckily I was close to home and got it back. The tipoff to me was that I thought I was hearing intake noise. Sure enough, the rubber boot which connects the air cleaner and intake piping to the throttle body came loose. Obviously the computer was confused. It turned out to be an easy fix, but this is now added to my inspection list. Just thought this might help someone else. 
    • lincolnsq175
      Are there any performance parts for ut400?
      By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...