Quantcast
Jump to content


Recommended Posts

Posted

I tried posting a video of the Trooper with a new canvas enclosure here to show what the vision was like looking through the plastic windscreen, but I could not so I opened a youtube account and posted it there. The link is

and it will give you a fair idea what the vision is like & a NZ bush track. This one was a closed forestry rd that wouldn't of seen a truck in years. We did find a truck but that was the end of that track. The vision through the windscreen is surprisingly very good but I still decided to add a zip and now you get the best of both worlds. The photos of the zip are here: http://community.webshots.com/album/568944807yrkoaG

Cheers Mike.

Posted
I tried posting a video of the Trooper with a new canvas enclosure here to show what the vision was like looking through the plastic windscreen, but I could not so I opened a youtube account and posted it there. The link is
and it will give you a fair idea what the vision is like & a NZ bush track. This one was a closed forestry rd that wouldn't of seen a truck in years. We did find a truck but that was the end of that track. The vision through the windscreen is surprisingly very good but I still decided to add a zip and now you get the best of both worlds. The photos of the zip are here: http://community.webshots.com/album/568944807yrkoaG

Cheers Mike.

Mike

Where do you buy this enclosure for the Trooper or did you have it custom made?

Posted

This full canvas enclosure was made by Joyner and is new to the market. There is a hard enclosure available too. With my canvas enclosure, I was not happy with the design so I've had a zip added to the front windscreen, marine hardware fittings to the firewall and eyelets to the sill by a marine upholsterer. The video was an attempt to show the difference between the plastic screen and open air by flashing the camera in & out of the cab. If your worried about a plastic windscreen not having good vision don't be because it's no worse than glass however I would recommend making these changes because of heat build up on a hot day and more importantly for mud bogging because mud these plastic windscreens equals poor vision at best. She's a rip snorter of a day over here and it's forecasted to get up to 26c(which is about 80f) so I'm going back up to Moirs Hill see how much better it is like this and I'll take the camera.

Cheers Mike.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By Steve Waldner
      Looking to buy a Kioti Mechron 2200
×
×
  • Create New...