Quantcast
Jump to content


2009 Joyner Trooper 1100 T2 diff cable removal

Anthony Butler

By Anthony Butler
in Joyner UTV SxS Forum

 Share

Recommended Posts

Dan B Community Regular

Dan B

Posted
Posted

I looked at my rear differential.  It looks like I'd have to remove the differential to get access to the internal cable connection which means I'd have to just about remove all the rear axle components. Before doing that, eliminate all other possibilities such as a binding lever (I presume you did that).  Also, get under your ride to see of there's something as simple as a clamp.  It would be a poor design if I have to remove and disassemble a differential just to preplace the cable.  Maybe someone has a service manual that give a better answer than I have.

Does your 4WD lever "lock" into the 4WD position or is it soft and mushy like mine?

mixfixdave Enthusiast

mixfixdave

Posted
Posted

I’m thinking if the locker pin is pulled into the diff enough that you can’t get the cable out, then you need to remove the diff and open it up.
Happened to me once, locker wouldn’t engage, but the problem was the locker mechanism/fork inside the differential was bent and off the locker ring. I straightened it and it’s been fine for years.
Also had some loose ring gear bolts and did the Lenny upgrade while I had it apart.
Here’s a pic of the locker fork and ring
b79d67cf34cda34a682225906dc649a3.jpg

  • 1 year later...
jetndude Newbie

jetndude

Posted
Posted

Thanks for that pic. I just ordered a new rear diff and it came with a (damaged in shipping) broken diff lock actuator lever (that connects to the cable going to the front). I wanted to know if that pin was removable somehow and you just showed me what's on the other side ... doesn't look removable. Thanks a bunch!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Gerald Dillman
      2008 Joyner trooper transmission parts
      By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • davebuckholts
      2009/10 American Sportworks LSV 48v
      By davebuckholts
      I just picked this UTV up off of Marketplace. It needs batteries. 
      I am installing a single 48v lithium battery. 
      The on board charger, a NOCO Genius GX 4820, has a lithium mode. 
      Has anyone here used this charger on new lithium batteries? I want to be certain of the compatibility before hooking the charger to this expensive battery. **
       
      **
      I got in touch with NOCO and they told me the charger is fine to use on a new LiFePo battery. 
      Nice charger. Many modes. New ones are running about $550. 

    • Karlibob
      2020 Tracker 800 sx front end noise
      By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary
    • Paul L
      Kubota RTV-XG850 Sidekick shifting into nuetral problems
      By Paul L
      When I am driving at 30 to 40 mph on the highway, the display will change from H (high) to R (reverse).  It does not actually shift into reverse, it seems to shift into neutral and starts losing speed and the gas pedal has no effect.  After the rpm/speed drops for 5 seconds or so, it changes back to H and runs fine for another minute or so.  You have to try to drive it at less than 5000 rpm or so, to try and keep this from happening.  Any ideas on what the problem might be?  It only happens at the higher speeds.
    • mcraigchr
      550 - Diff fluid change and final drive?
      By mcraigchr
      Howdy y'all,
      I have the service manual, but it leaves me with questions.
      1)  It is time to change the diff fluid.  The service manual says 80w-90 for the rear and Dextron 3 ATF for the front!  Is that correct?  That seems odd to me.
      2) The service manual also speaks of the need to change the transmission fluid but gives no detail about it.  What needs to happen here?
      3). The service manual also discusses changing the final drive fluid with 80-90 Hypoid.  Is the final drive actually the tranny?
      Any details about the changing of the fluid or what fluid to use ... or even other things that need to be changed that the manual does not mention would be appreciated.
      Thanks,
      Craig C.  

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...