Quantcast
Jump to content


Recommended Posts

Posted

Greetings all!  

Purchased a 2021 T-Boss X-Golf 550 about three weeks ago and am having a blast with this thing!  It's a very capable and well built machine. 

I've put 30 hours and 400 miles on it so far.  I've really put it through its paces too.  Been tearing around the sand dunes, climbing very considerable hills with no problem, tore through some light mud and even hauled around a couple adults around the neighborhood to look at Christmas lights!

Did my after break-in service and am using Lucas oil for oil changes and differential changes.  The manual calls for 15w40 but couldn't find any so after speaking to Massimo the said 10w40 Lucas atv oil was fine.

Anyhow, I've done the "cooling fan jumper wire" mod almost right away.  I've also installed an overhead stereo system that looks like it belongs in there stock along with some LED's.  I have an underglow kit and light bar I'll be adding during the Christmas break so I'll add pics once those are installed.  

Here's a link to the overhead speaker box if anyone is interested.  I can take better pics if interested in how I mounted it.

https://www.amazon.com/gp/aw/d/B07CJ4YBTS?psc=1&ref=ppx_pop_mob_b_asin_title

spacer.png

 

spacer.png

 

 

spacer.png

 

 

spacer.png

 

 

 

 

  • Like 1
Posted
48 minutes ago, Travis said:

if it doesn't have a wet clutch, Shell Rotella 15w40 is an excellent oil to use.

Thanks for the reply.  It does have a wet clutch.  I researched Rotella a ton.  From what I gather, the old white bottle Rotella was ok for wet clutches but the newer stuff T5 and T6 supposedly have friction modifiers that cause the clutch to slip.  Lucas atv oil fits the bill except that it's 10w40 and not 15w40.  I spoke with the techs at Massimo and the said they don't see a problem with it as long as it's a quality oil and JASO MA rated.

Posted

I use Castrol ACTEVO 10W30 .. use it in all 4 of my ATVs too, for many years..   good for WET clutches .. I sincerely hope that by modifying the fan ,your engine will never blow head or gasket like so many have.  Y ou made it to 400 miles which is way more than mine did before the overheating  killed it ... I hope you get many  years of fun  out of it.. Merry Christmas 

Posted
On 12/24/2020 at 8:18 AM, Joe Breaux said:

I use Castrol ACTEVO 10W30 .. use it in all 4 of my ATVs too, for many years..   good for WET clutches .. I sincerely hope that by modifying the fan ,your engine will never blow head or gasket like so many have.  Y ou made it to 400 miles which is way more than mine did before the overheating  killed it ... I hope you get many  years of fun  out of it.. Merry Christmas 

I hope so too.  I keep a close eye on the temp, now I just have to train my wife to do the same.  

I'm glad you mentioned the Castrol.  I'll take a look locally to see if they have it.  Always nice to just be able to go grab what you need instead of waiting for it to be shipped.

I installed the underglow kit and curved light bar today.  Here's a couple of pics of how they turned out.  I'll get wider shots later.  

Merry Christmas to you too!

Underglow kit

https://www.amazon.com/gp/aw/d/B08DFMHFVX?psc=1&ref=ppx_pop_mob_b_asin_title

Light Bar 210w combo is the one I got

https://www.amazon.com/gp/aw/d/B01MR396S4?psc=1&ref=ppx_pop_mob_b_asin_title&th=1

spacer.png

spacer.png

spacer.png

spacer.png

Here's some wider shots of the underglow and the light bar.

spacer.png

spacer.png

  • Like 1
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By amiracle40995
      I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have. 

    • By Homeowner A
      What's the best replacement battery option for a Coleman UTV 400?  
    • By SkyPilot56
      working on a coleman 550 out fitter , had a shit load of codes, coil, injector , and the map sensor for fuel injector replaced all 3 and figured it would start , but no joy have spark (new plug also and inline fuel filter) cleared the codes and still have the engine light , turns over fine but damn thing still will not start, friends daughters were driving it and turned it off to park , and went back to start it and same thing turns over but will not start , with this machine anyone have any ideas as to what the hell , I should be looking for , no plug's unplug checked wires none seem to be pulled apart or broken !
    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By ToughLuck
      I have a 2021 Massimo MXU 1000.  Last winter the front drive shaft sheared off inside the motor and it was cheaper to buy a new motor than to take it apart in order to remove the front drive shaft that was broken inside the case…
      Now it is running rich, seems to maybe be geared too high, does not accelerate well once you hit about 28mph.  I’ve replaced the O2 sensor.  MAF is next (I accidentally ordered the wrong one, but when I removed the old one you can clearly smell fuel).  
       I’m not a motorhead but I can turn a wrench.  Any ideas how to get this motor optimized?  The motor has about 300 miles on it.  I broke it in as recommended in the manual. 
×
×
  • Create New...