Quantcast
Jump to content

2009 Hisun 700 - Stator Gasket bush fix

Joel Goldsney

By Joel Goldsney
in Hisun UTV SxS Forum

 Share

Recommended Posts

Joel Goldsney Apprentice

Joel Goldsney

Posted
Posted

I did a fairly major overhaul on my HS 700.

Had some issues with bending valves...I believe found the root of the problem. Replaced the timing chain (old one was  stretched 3/4" longer) 

Got everything back together....but had a fairly steady oil leak from the stator cover.  I tightened the bolts as much as I dared, they were all torqued to spec at assembly but  when I noticed the leak I gave the bolts on either side of the leak an extra bit of tightening to try and get the leak to stop but no luck.  

Had a bit of a brain wave and did some googling, seems like a few other folks had  a similar idea. I cleaned the area with brake clean and ran a bead of crazy glue down the crack. Let it soak in and dry and did a second round. Let it dry and fired it up, voila...no more leak.

Will see how this holds up but it saved me having to rip it all apart again , hopefully this helps someone else. 

 

20210101_153002.jpg

20210101_152926.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • JimS409
      2011 Hisun 700
      By JimS409
      I picked up this Hisun 700cc for a good deal. no crank no start unit 1900 miles on it. Put a new battery and starter solenoid fired right up but sounded rough some kind of rattle/clunk noise.  Does anyone know what this noise could be? Couldn't get a better video of it running as i don't want to risk doing more damage. Drained the oil it looks good no metal in it. 

      445374820_7315077208620291_6073155782020130975_n.mp4  
    • Anthony Vigil
      2021 Hisun 700 grease fittings
      By Anthony Vigil
      Can anyone tell me how they grease the drivelines ?  Can’t grease the u joints. Do you need to take the driveline off ? 
      And are they easy to take off?
      Thanks
    • tim hughes
      2021 axis 500 belt issues
      By tim hughes
      does any one else have a slipping belt on the hisun ...i put new wet clutch one way bearing new belt, cleaned primary and secondary and still get slight slippage
    • Michael Wood
      2018 Massimo Buck 400 Brake Issues
      By Michael Wood
      I have a 2018 Massimo Buck 400 with 278 miles. 
      Having issues with my brakes. Took the buggy hunting and when I let my foot off the gas pedal it pulls without pressing on the brake. I looked and the pads on all 4 wheels are all toast. The E-Brake hasn’t been on since I have had it. I am guessing it may be a master cylinder issue because all 4 pads are gone. They all seem to have worn evenly that’s why I think the master cylinder. Just got the machine used from a older couple and they said it sat for some time in there pole barn. Possibly the brake lines? Calipers? I took one brake apart and when I depressed the caliper it didn’t stay. Any help is muck appreciated. 
    • Onebad54
      750 Hisun Sector shifter problem
      By Onebad54
      Has anyone solved the 750 Hisun Sector shifter problem?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...