Earlier this week — and after much anticipation — Lexus unveiled the new 2022 LX 600 SUV. It's a luxurious American version of the new Land Cruiser and shares a V6 powertrain with the new Toyota Tundra pickup. The LX wasn't a shock; it's just about the most characteristically "Lexus" vehicle one could imagine, except perhaps the LS sedan. But Lexus also released a different vehicle you would not have expected this week.
At the end of the LX announcement video, Lexus teased a new mobility concept called the "Recreational Off-Highway Vehicle," or ROV. It's an all-terrain vehicle — or, as we will choose to interpret it, a supremely badass golf cart — that runs on a hydrogen combustion engine. Sadly, Lexus did not include an utterly superfluous spindle grille, although the shape of the front end will certainly remind you of that shape.
An ATV makes perfect sense as a showcase for hydrogen combustion. One of the technology's most significant drawbacks for current production use is that it can't produce as much power as gasoline combustion engines with the same size engine footprint. So a low-speed wood path cruiser could get away with far less power than a recreational on-highway vehicle.
Read more from source: https://www.gearpatrol.com/cars/a37974052/lexus-off-road-atv-concept/
Wiring harness is a mess has anyone ever tore it all out and only put in the basics. Power ,ignition ,starter, stator and regulatorBy Hisun .500
So my hisun 500 is tore up and all the wiring is wasted i was wondering can i pull out all the wiring and just put in the. Basics .please help
I have an American Landmaster LM500 with an old style snow plow hook-up. Unfortunately, the mounting bracket broke & I lost the key part where the plow receiver connects to the cross bar with two pins.
I checked with customer service & they said...
On Monday, January 10, 2022, 03:25:29 PM EST, Feedback <[email protected]> wrote: Sounds like it may be the old style push tube universal mount system, it looks like those have been discontinued but we may still have some back there. I believe they are sold as a kit though and they are not cheap, part # 15329. I’ve included a photo below since the web store does not have a photo for that part.
I checked with our parts department and neither the kit or the components are available as that was the older style hook up system. The only option at this point would to have something manufactured. All of our current plows are either dual actuated or winch hookup so we would only have components for those models as of currently.
In the picture, below, it would be item #5 (the one with the two mounting brackets that hold the pins that the plow mount latches onto) - not the top one in the picture, but the one below t hat.
I have all the other parts - but the missing part is critical to mounting the plow.
Does anyone happen to have an old one they could part with - or have an alternative solution?
The rig wasn't optimal, as you had to use the winch to raise & lower the blade & manually adjust the angle. It kept falling off when I was plowing snow - as the pins that hold it in only have a groove for a pin clip & they would often get knocked off & then the plow would hang down & you'd loose the pin - then it would get all messed up.
Thanks in advance for any advice. I am thinking of going to a welding shop to see if they can create something - but it will still have the same limitations as before - the pins are highly specific and not cheap
15331 Pin, Shear Univ Mount Blade PART #: 15331