Quantcast
Jump to content


Recommended Posts

Posted

Hi all, never have owned a UTV before. I was looking at a small Honda 500 UTV but when I went to the dealership, they had a ton of Hisun 550 Strikes & Sectors. Started doing some research on Hisun and it sounds like a decent starter utv. I will be doing some light trail riding and mostly street riding. 

What should i be looking for and is Hisun that good of a brand? CFMOTO's seem similar to Hisun's too.  

Strike 550 was $8,500 new. 

 

Thanks! 

 

Posted

just from the problems with HiSun on this forum only, i'd stay away from Anything HiSun.... CF moto,  (massimo now made by*Linahi* so they may be better) and Benneche are all made by hisun if i remember right.

Go with the Honda, you'll be glad you did, if their 500 is anything like their other products,.

  • Like 1
Posted
16 hours ago, Travis said:

just from the problems with HiSun on this forum only, i'd stay away from Anything HiSun.... CF moto, Massimo and Benneche are all made by hisun if i remember right.

Go with the Honda, you'll be glad you did, if their 500 is anything like their other products,.

Actually, the Massimo's are now made by Linhai.  Although the grill on my TBoss550 says Massimo, there are Linhai stamped parts everywhere else.  But agree with Travis, alot of Hisun owners reporting problems here.

  • Like 2
Posted

Buy something with good factory support. The forum is packed with people who have difficult mechanical issues, with these cheaper UTVs. Problems that would be much easier to solve, if the factory only had provided a decent level of customer support. 

Buy once, and cry once. Buy a cheap UTV, and it'll be everything it needs to be, until it breaks down. Then you may  have real problems. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Garjess
      My rtv 1140 won't turn over.  I've jumped the neutral switch, and the brake switch, and checked the ignition switch. I'm not getting any power to the trigger wire on the starter solenoid.  It starts fine with the key on and putting power to the trigger wire on the solonoid.
      Does a 2010 RTV 1140 cpx have a starter relay? 
      Does anyone have a wiring diagram?
×
×
  • Create New...