Quantcast
Jump to content


Recommended Posts

Posted

I'm taking my Trooper to the White Mountains for the summer, where there's lots of rain so I thought I better make some kind of a top. I had the material for a Bimini top but decided something more substantial was in order.

Instead of fabric I bought a 48"x48" piece of 1/8" ABS black plastic. The top took a piece 48"x33". The remaining piece I used to run behind the top down to the spare tire mount. That should keep a bit more of the rain out.

I used 1 1/2" foam pipe insulation around 3 sides of the top and attached the plastic sheet using cable ties. Using ties I can remove the top quickly. To stiffen the top I ran a piece of square aluminum running fore and aft along the center of the top.

Total investment was around $40.00. I'll let you know how it holds up in the Arizona sun.

Gumball

  • 10 months later...
Posted
I'm taking my Trooper to the White Mountains for the summer, where there's lots of rain so I thought I better make some kind of a top. I had the material for a Bimini top but decided something more substantial was in order.

Instead of fabric I bought a 48"x48" piece of 1/8" ABS black plastic. The top took a piece 48"x33". The remaining piece I used to run behind the top down to the spare tire mount. That should keep a bit more of the rain out.

I used 1 1/2" foam pipe insulation around 3 sides of the top and attached the plastic sheet using cable ties. Using ties I can remove the top quickly. To stiffen the top I ran a piece of square aluminum running fore and aft along the center of the top.

Total investment was around $40.00. I'll let you know how it holds up in the Arizona sun.

Gumball

I live in NH. Were you able to drive your Trooper on the roads? I registered my trooper as an ATV. Debating on trying and register as a car.

Posted

Hi Scimaro,

Here in Arizona many of the ATVs as well as off road cars are licensed for the street. My Trooper has a road license along with insurance, a off highway permit, and a state trust land permit.

The Trooper is not what you would call a good road car. It's to low geared for any real travel in traffic but it's fine for low speed driving. I trailer it when there is any great distance to travel.

To make things better for the road I replaced the off road tires with Super Swampers. They work fine for most any type terrain and don't shake you to pieces on the road. I've also have the same size wheels all around so I can carry one spare.

The top works well in the sun as well as rain. I did add a windshield but is it is next to worthless in the dust. I will put it back on when I return to the White Mountains in the rain.

Have fun!

Gumball

Posted
Hi Scimaro,

Here in Arizona many of the ATVs as well as off road cars are licensed for the street. My Trooper has a road license along with insurance, a off highway permit, and a state trust land permit.

The Trooper is not what you would call a good road car. It's to low geared for any real travel in traffic but it's fine for low speed driving. I trailer it when there is any great distance to travel.

To make things better for the road I replaced the off road tires with Super Swampers. They work fine for most any type terrain and don't shake you to pieces on the road. I've also have the same size wheels all around so I can carry one spare.

The top works well in the sun as well as rain. I did add a windshield but is it is next to worthless in the dust. I will put it back on when I return to the White Mountains in the rain.

Have fun!

Gumball

Looking up NH law and it states that vehicle must meet United States Department of Transportation motor vehicle safety standards. Do you know where I could find this info out? If it is a will be able to reg in NH.

Thanks for the reply

Posted

I looked at the New Hampshire laws on the Internet. Now I know why you're confused about how to go about licensing your Trooper.

Here's a contact in New Hampshire that might be able to help you. [email protected]

There may be a forum member that can aim you in the right direction. That's one of the BIG benefits of being a member.

Good Luck!

Gumball

Posted
I looked at the New Hampshire laws on the Internet. Now I know why you're confused about how to go about licensing your Trooper.

Here's a contact in New Hampshire that might be able to help you. [email protected]

There may be a forum member that can aim you in the right direction. That's one of the BIG benefits of being a member.

Good Luck!

Gumball

This is the same guy I emailed regarding warranty work and he told me he does not work on Joyner vehicles. From info I found it doesn't look like I will be able to reg as a car without it meeting federal safety standards.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Outlaw Redneck
      Hello all. I have a 2005 Joyner sand spider 650 with the dreaded broken output shaft on the transmission. I got ahold of a 2007 joyner commando 650 for cheap that had a bad motor but a good transmission. I got it because everything i read said that the transmission would work but it seems that it will not. Due to the commando being 4x4 it has a selectable locker and a small ring gear using a "idler" gear to turn the ring gear which make the output spin the wrong direction. Is there any way that I can make this thing work? I really dont want a commando,  I like the buggy but if the trans wont work then I can only put my motor in the commando. Any help would be appreciated. I have the ring gear from the original trans but the shaft is broken and the shaft from the commando wont fit the ring gear it doesn't appear. 
    • By TimsBrickHouse
      DO NOT BUY ANY THING FROM HISUN Period! I had the axis 700 for 2 months when a rat or squirrel ate both wiring harnesses. (Main & ECM)Wanna know why? Because the manufacture of these things in their infinite wisdom use either, a soybean oil or a peanut oil to run the wires through the the wire loom. Hmmm i wonder why they would be inclined to eat the wires. So now I have $10K machine that I've only had for 2 months when all this happened and they will not warranty it at all. It is going to cost me $800 to $1000 to get this fixed. Here is a link to a video showing where we took our Hisun notice how many are there:
       
      https://photos.app.goo.gl/2FdniAoCyvTJMKae7
       
      So counting mine, there are 16 of Hisun Axis on the lot that i took in for authorized dealer, with the exact same problem, plus other troubles that the mechanic explained to me. This particular place told me they are not going to work on them anymore. I will be posting this in as many places as possible to reach the masses. I hope its worth Hisun!
    • By mrpro
      Have a Coleman UT400 and the headlights are terrible.  What should I consider to make it so I can see well when driving in the dark?  
    • By Recon Marine
      Ran fine parked it in garage and 5 days later would not start or make any noise trying to start. Bought new battery, installed it and still nothing, no noise or anything. 
      Any idea? I can’t figure it out since when I parked it, it was running great. 
      Thanks
×
×
  • Create New...