Quantcast
Jump to content


2021 Tracker 500s winch wiring

Minerz
 Share

Recommended Posts

Minerz Newbie

Minerz

Posted
Posted

Hey guys, 2021 Textron 500s. I bought this unit and Bass pro sent me the Provantage 3000 winch. It is all color coded. I own a ranch with a lot of equipment, so I am fairly fluent in working things. tractors, balers and such. So I have all of this hooked up. If I just put the wires yellow and blue on the batt, winch both ways. when I put them back on the solenoid which has post colored--YELLOW, BLUE, RED, BLACK AND 3 flat connections on the side ---GREEN, BROWN BLACK. This flat connectors go to the switch. Up at the switch I have another plug that is right next to the switch.  Now I have even changed solenoids. bit I cannot get any juice to the switch. May not be the best description, but just checking if anyone has run into a winch problem or has wired one up, and can tell me what little trick they used to get power to the switch. Thanks in case anyone has an answer for me. I drove down from Idaho to Las Vegas to pick this up so I am not taking it back to Vegas, and the closest place to get it worked on is 120 miles away. Just looking for something else to check or do, before I throw the switch away and wire my own switch in.  

Tracker.jpg

Tracker 1.jpg

  • Alex changed the title to 2021 Tracker 500s winch wiring
kenfain Experienced

kenfain

Posted
Posted

Are you sure that the switch is bad? That extra plug is probably for a wireless remote.

Why not take it up with Bass pro, and the manufacturers technical people. They should know the exact purpose for each wire, and how to test for proper function. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • Rusmis91
      Considering buying a 2021 1500 coleman
      By Rusmis91
      I’ve never been around Coleman Utv machines. Do they have a good reputation, durable dependability. Could you compare them to yamaha rhinos or Polaris ranger
       
      thanks in advance
    • Cliffampranch
      2025 Amp Crew Ranch Edition range issues and questions.
      By Cliffampranch
      Hi All,
      I have a 14 mile round trip on level roads to reach the property where I work with my 2025 Amp Crew Ranch (purchased, April 2026).  That 14 mile round trip uses 60% of the battery as shown on the gage for a calculated range of 23.3 miles versus an advertised “up to 50 miles” range.  A mile or two working on the property gets me a flashing gage and warning beeping by the time I get home.  The dealer was good to work with and even with a new battery (yesterday) the results were about the same, although there seemed to be more power and a higher top speed.  I own a Mach-e Mustang so I am familiar with how various conditions affect range, but less than 50% of advertised range just seems like there has to be something out of whack.
      Now I’m wondering if there is a controller and/or software issue affecting the range and performance.  At various points the Amp seems to lose power for no reason and then has trouble maintaining speed.  Any ideas?
      Also, twice now, the brakes seem to have not released fully.  After noticing reduced speed, I stopped and check the rotors and wheel…..HOT!  So, now every time I feel less power, I stopped to cycle the brakes and check the temperature.  Very annoying.  Are there any adjustments to be had?
      And yes, as noted in another post, sometimes the switching from forward to reverse or high to low speed feels sluggish or balky.
      Lastly, while an electric vehicle powertrain is quiet, my Amp was horrible from a road noise and vibration standpoint.  This was easily fixed by locating panels vibrating on other panels or the frame (even the cup holders were vibrating) and installing felt adhesive pads at the contact points (seat to frame, windshield to frame, fenders to frame, etc.).  This is a $10 and 1/2 hour fix that makes a significant improvement in the driver/passenger experience.  Tire noise, yes, but that’s because of the knobby tread.
      I’m trying hard to like my Amp and would appreciate any tips, advice or solutions.
    • Mountainman
      Radiator fan on 2018 textron havoc won’t come on
      By Mountainman
      Radiator fan on 2018 textron havoc won’t come on
    • Burk
      2021 Axis(Hisun) 700 Will not fire up
      By Burk
      I have a 2021 Axis(Hisun) 700 from Lowes. Will not start. Checked starter, solenoid, spark plug and fuel pump. Everything seems to be fine. The motor turns over and will try to start but just will not. Battery is also good. Frustrated!
    • Dave Jones
      2021 Coleman ut400 rev limiter
      By Dave Jones
      So with seat belt on  I can only get up to 20mph then it starts bucking until I get under 20 again. Diconnected the seatbelt and same thing. Reconnected seatbelt and unplugged speed sensor. Zoom..it flies. But now I have no speedometer. I have a new speedometer sensor on the way..any other ideas?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...