Quantcast
Jump to content


Coleman 550 Loose Timing Chain

Copperline

By Copperline
in Coleman UTV SxS Forum

 Share

Recommended Posts

Copperline Newbie

Copperline

Posted
Posted

I have a Coleman 550 (hisun). Wouldnt start and was sucking instead of blowing through the spark plug hole. Got to the timing chain and it was very loose and for sure the timing was way off. Got the tensioner off and set it to TDC and got the cam gear back aligned. Put the chain back on and set the tensioner as instructed and the chain is still very loose. I extended the tensioner as far as it would go to test and the chain is still loose. 

Any ideas what could be broken or wrong? Why would the chain be so loose?

 

 

  • Alex changed the title to Coleman 550 Loose Timing Chain
Travis Grand Master

Travis

Posted
Posted
9 hours ago, Copperline said:

I think you are right. 

I'm just getting into the process of replacing it and struggling to get the flywheel nut off. 

get some paracord or small rope, remove a spark plug, insert the rope into the plug hole until the cylinder is full (won't take anymore), remove the nut.

i've used this method many many times.

Copperline Newbie

Copperline

Posted
  • Author
Posted

I ended up just fabricating a tool to make it work. A 16" pice of thick steel plate about 4 inches tall. Drilled a big hole about 3" from one end to allow the socket to fit and then two outside holes to put long bolts into the flywheel (I removed two of the flywheel allen bolts). This allows the tool to jam against the frame of the cart and I was able to remove the nut easily with no damage. 

  • Like 1
aefron88 Community Regular

aefron88

Posted
Posted
On 1/15/2023 at 9:54 AM, Travis said:

Wild guess would be that the chain has stretched from heat and wear. Hisun isn't exactly the industry leader in quality parts.

Yep likely stretched. Buy a new chain and compare lengths and I bet the new one is shorter.

Copperline Newbie

Copperline

Posted
  • Author
Posted

I replaced the timing chain as well as the oil chain. Hopefully that does it. Working on this inside the frame has been horrible. I cracked an oil gear tooth trying to keep the engine from turning while trying to get the flywheel off. Two years is really too short of a time to have to be tearing this apart for chains. 

  • 3 months later...
Copperline Newbie

Copperline

Posted
  • Author
Posted

107 hours. 

Make sure you change the oil chain while you are in there.

It was a horrible process. Lots of home made tools because I did it with the engine still in the cart. 

Unreal that the chains are such garbage to crap out at 100 hours. The cart still looks brand new.

Be careful re-fitting the case cover that its flush before you start tightening the bolts. There are so many possible catch points (water pump) that you might think its on and start tightening and then CRACK as you crack the case. As me how I know!

 

 

 

Eppa Wimbish Newbie

Eppa Wimbish

Posted
Posted
16 minutes ago, Copperline said:

107 hours. 

Make sure you change the oil chain while you are in there.

It was a horrible process. Lots of home made tools because I did it with the engine still in the cart. 

Unreal that the chains are such garbage to crap out at 100 hours. The cart still looks brand new.

Be careful re-fitting the case cover that its flush before you start tightening the bolts. There are so many possible catch points (water pump) that you might think its on and start tightening and then CRACK as you crack the case. As me how I know!

Thanks for responding.  The one here shows 200 hrs.  The chain is sloppy loose with the tensioner at full extension.  I've told the owner that it makes no sense to do all the work necessary to replace both chains, as there's no reason to think the new chains will be an improvement over the current ones....  The chain appears to be too small for the application, as it is much smaller than motorcycle timing chains, but about the size of 50cc scooter chains.  In any case, I won't consider trying to do that work with the engine still in place......

 

 

 

  • 9 months later...
TripleBRanch Newbie

TripleBRanch

Posted
Posted
On 1/29/2023 at 6:25 AM, Copperline said:

I replaced the timing chain as well as the oil chain. Hopefully that does it. Working on this inside the frame has been horrible. I cracked an oil gear tooth trying to keep the engine from turning while trying to get the flywheel off. Two years is really too short of a time to have to be tearing this apart for chains. 

Where were you able to find the 2 chains. I found a couple places that have the timing chain at ridiculous prices and one place for the oil pump chain but not SURE it’s the right chain. Ideas?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Rschrem
      2010 700 Hisun starter issue
      By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • amiracle40995
      2019 Coleman 550 700-7 code at startup
      By amiracle40995
      I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have. 

    • KWinTX
      Information on 2024 Hison 550x Stryker with a No start Issue
      By KWinTX
      I just bought a new 2024 Hison 550 Stryker 2 months ago. this is the second time I have had this issue.  It only has about 20 hours on it. The last time it happened we took it back to the dealer. it was a fuse.  Since we live three-hour time driving there and back. I would like to find another solution if possible.  I have tried all the fuses that seem to have anything to do with starting.  Currently checking the battery. The battery is new. it came with the unit. It is probably 6 months old.  the UTV has all power to everything electrical. lights turn signals and radio all work.  When trying the key to start . it is 100% dead. as in it doesn't even click.  There is a low whirring like the fuel pump is turning on though. The Unit was running and driving just fine.  we shut it down for the night. The next morning my wife found it in this condition.  Thanks for any Ideas or solutions???   Otherwise, it goes back to the dealer tomorrow. Just hope I didn't buy a lemon. Great little UTV when it does run.😅  anyone else ever have this Issue..? 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...