Quantcast
Jump to content

Farmingtion, New Mexico - June 11-14, 2010


rocmoc

Recommended Posts

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

forest & trees, AGREE! and Cool Temps.

rocmoc n AZ/Mexico

Here's an observation that may need to be considered; there is very little rock crawling type stuff in the forest, usually, however, if we came all the way up to American Fork, Utah and went up Mineral Basin, there's lots of rocks but not the hard climbs, start here and work backwards 2987037000104110397EnNRvz_th.jpg

Just a comment and possibity.

Kinarfi

Link to comment
Share on other sites

AND NO DUST! If we go to somewhere that requires us to ride dusty trails or roads, then I suggest it be during a little rainy season. Then we could go out after the LITTLE rainfall. This is what we do here in So. AZ. We are not riding currently as it is way too dusty. Within the next two weeks, monsoon season starts and we go out after the daily/bi-daily rain. Thus no dust. Man am I a pain!

rocmoc n AZ/Baja

Link to comment
Share on other sites

AND NO DUST! If we go to somewhere that requires us to ride dusty trails or roads, then I suggest it be during a little rainy season. Then we could go out after the LITTLE rainfall. This is what we do here in So. AZ. We are not riding currently as it is way too dusty. Within the next two weeks, monsoon season starts and we go out after the daily/bi-daily rain. Thus no dust. Man am I a pain!

rocmoc n AZ/Baja

Closing this thread, I hope every got all the photos attached and every said. Now for planning the next one.

Started new thread and pinned it, The next Jamboree - Get Together - UTV BOARD - Side X Side and UTV Forum

Make any suggestion you want for consideration of when & where. and when not or where not. :P

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Similar Topics

    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By joeam
      I have a 2018 TW450E that runs in my yard and slow good just will not go down the road seems to be running out of fuel where should i start? I have replaced both fuel and air filter drained gas and tried a small auxiliary tank same issue i have ordered a new vacuum fuel pump to try next anyone in Texas that works on these?
    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
    • By Jamesjoh
      I've installed the Kemimoto side by side mirrors in my UTV to replace one that would not stay in place.This one give great views and tightens down nicely, but you have to take them down evenly or it gets bound up. Just an all around great mirror.
    • By Steve Toney
      Hello, my name is Steve and just signing up.  Bought my first UTV yesterday.  It is a Massimo T-Boss 550.  



×
×
  • Create New...