Quantcast
Jump to content

CLOSE CALL


Gumball

Recommended Posts

Wow! that was close.

With all the speculation on the demise of Joyner I was worried that our most valuable resource, that's all of you, would be lost when the board went down. We need to put together a member list just in case that happens.

I haven't explored all the capabilities of the existing board, maybe this information is already here. If so, please tell me where to find it.

Gumball

Link to comment
Share on other sites

Wow! that was close.

With all the speculation on the demise of Joyner I was worried that our most valuable resource, that's all of you, would be lost when the board went down. We need to put together a member list just in case that happens.

I haven't explored all the capabilities of the existing board, maybe this information is already here. If so, please tell me where to find it.

Gumball

I will go for that. while it was down I was having withdraws.I kept checking numerous times every day.I am just glad it is back up and willing to participate in whatever means anyone comes up with to keep in toch should this happen again.

I just want t thank everyone for all the good advise and tips they have given me since becoming a Joyner owner.

Link to comment
Share on other sites

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

Link to comment
Share on other sites

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

I will do what I can, how do you suggest it to be done?

Link to comment
Share on other sites

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

OK here is a plan. Lets have everyone send their E-mail address along with who they are and maybe address and phone numbers if anyone chooses to Kinarfi, Rocmoc or Cinda, all moderators.

this information can then be posted on the forum as pinned member information. As individuals, anyone can copy this information for our own records. I've narrowed down the volunteer list to one of the three, that is for now. I understand that all the moderators have other priorities but they are the only ones that can pin a topic so lets start there. Volunteer? If we get a volunteer, we can start sending contact info to them.

Lenny

Link to comment
Share on other sites

While this is a good idea in a perfect world, I would never allow my Email and address and phone to be publicly available on a forum, too many spammers and scammers out there. This would need to be a behind the scenes operation and probably done with PMs. I have some info on several members in my contacts file that include Jim Burns, former owner of Joyner (I think), but I won't pass it on because I don't remember getting permission to do so.

What I'm saying is if you want a list, pm those who you want on it and ask, if they send you the information, keep it to your self unless they say to pass it on.

Kinarfi

Link to comment
Share on other sites

While this is a good idea in a perfect world, I would never allow my Email and address and phone to be publicly available on a forum, too many spammers and scammers out there. This would need to be a behind the scenes operation and probably done with PMs. I have some info on several members in my contacts file that include Jim Burns, former owner of Joyner (I think), but I won't pass it on because I don't remember getting permission to do so.

What I'm saying is if you want a list, pm those who you want on it and ask, if they send you the information, keep it to your self unless they say to pass it on.

Kinarfi

Ya, your probably right.

Lenny

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By LindaCall60
      Purchased a 2011 bighorn banchee. Needs motor work. Not sure what. Husband is mechanic but not computer savvy. So, is there a manual that will tell him how to tear this down?  We have down loaded a service manual, but he says it doesn't tell him what he is looking for. 
    • By Steve Toney
      Hello, my name is Steve and just signing up.  Bought my first UTV yesterday.  It is a Massimo T-Boss 550.  
    • By Kalyla Jackson
      Hey all!
      I'm on a mission to buy my first UTV soundbar as a gift for my dad. I'm aiming for something that offers great sound quality without breaking the bank – my budget is around $250. Right now, I'm considering options like ecoxgear, kemimoto, and boss.
      Does anyone have experience with these brands or specific models that you'd recommend? Any advice or suggestions would be super appreciated!
      Thanks in advance for your help!



    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By CBS
      Greetings from Southern Illinois. My name is Bruce and I currently have a Hisun HS550 Performance Rural King. I have had nothing but problems with this unit replaced so many parts of it and of course, it stopped working and will not start again for about the 3rd or 4th time since 2018 it only has a little over 500 miles and has cost me a bunch of money and headache and the Rural King where I purchased it has a repair man who is certified to work on HISUN but he charged me a little over $600 to repair it once back a few years ago and when I got it home after it being in his shop for over 2 weeks the thing worked for a very short time but when I went to start it the next day it was the same thing and they wouldn't check it further without me paying for service, labor, and parts and I went around and around with them and since there aren't any dealer service centers for Hisun near me and even most of them can't get to it for weeks to months and it could be at their shops for months as they tell me they have problems getting the parts needed from Hisun to fix these giant paper weights. Oh, and you can't buy a scan tool (code reader) Delphi 190121 unless you are one of their dealers and I can't find any other scanner tool that works with it except the Tiny Scan Tool which I purchased and it will work if I could find the correct adaptor cable and connector to connect the Tiny Scan to the diagnostic port on the Hisun HS550 Performance Rural King. Yep, I pretty much have been screwed every which way that can happen with this machine. I am disabled, have cancer, and am on a fixed income so I need help if anyone knows what the connector is called (type or part name) that will plug into the diagnostic port to get my scanner to work it is a 6-pin connector and I hear it only has to have 3 wires connected to it.
      Thanks 
×
×
  • Create New...