Quantcast
Jump to content


Recommended Posts

Posted

Wow! that was close.

With all the speculation on the demise of Joyner I was worried that our most valuable resource, that's all of you, would be lost when the board went down. We need to put together a member list just in case that happens.

I haven't explored all the capabilities of the existing board, maybe this information is already here. If so, please tell me where to find it.

Gumball

Posted

Wow! that was close.

With all the speculation on the demise of Joyner I was worried that our most valuable resource, that's all of you, would be lost when the board went down. We need to put together a member list just in case that happens.

I haven't explored all the capabilities of the existing board, maybe this information is already here. If so, please tell me where to find it.

Gumball

I will go for that. while it was down I was having withdraws.I kept checking numerous times every day.I am just glad it is back up and willing to participate in whatever means anyone comes up with to keep in toch should this happen again.

I just want t thank everyone for all the good advise and tips they have given me since becoming a Joyner owner.

Posted

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

Posted

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

I will do what I can, how do you suggest it to be done?

Posted

The Last Time the site was done and came back up, I tried to encourage the same thing. Was not very successful so I have a hard copy, print out, of any info I do not want to lose. Never could get anyone to step-up and put together & maintain a contact list. Volunteer?

rocmoc n AZ/Mexico

OK here is a plan. Lets have everyone send their E-mail address along with who they are and maybe address and phone numbers if anyone chooses to Kinarfi, Rocmoc or Cinda, all moderators.

this information can then be posted on the forum as pinned member information. As individuals, anyone can copy this information for our own records. I've narrowed down the volunteer list to one of the three, that is for now. I understand that all the moderators have other priorities but they are the only ones that can pin a topic so lets start there. Volunteer? If we get a volunteer, we can start sending contact info to them.

Lenny

Posted

While this is a good idea in a perfect world, I would never allow my Email and address and phone to be publicly available on a forum, too many spammers and scammers out there. This would need to be a behind the scenes operation and probably done with PMs. I have some info on several members in my contacts file that include Jim Burns, former owner of Joyner (I think), but I won't pass it on because I don't remember getting permission to do so.

What I'm saying is if you want a list, pm those who you want on it and ask, if they send you the information, keep it to your self unless they say to pass it on.

Kinarfi

Posted

While this is a good idea in a perfect world, I would never allow my Email and address and phone to be publicly available on a forum, too many spammers and scammers out there. This would need to be a behind the scenes operation and probably done with PMs. I have some info on several members in my contacts file that include Jim Burns, former owner of Joyner (I think), but I won't pass it on because I don't remember getting permission to do so.

What I'm saying is if you want a list, pm those who you want on it and ask, if they send you the information, keep it to your self unless they say to pass it on.

Kinarfi

Ya, your probably right.

Lenny

Posted

An Idea.

Everyone send your info to Kinarfi, Cinda & myself via a private message via this site. We will pull the info and keep it. If something ever happens, between the three of us we should be able to contact most everyone.

rocmoc n AZ/Mexico

Posted

An Idea.

Everyone send your info to Kinarfi, Cinda & myself via a private message via this site. We will pull the info and keep it. If something ever happens, between the three of us we should be able to contact most everyone.

rocmoc n AZ/Mexico

Sounds like a good idea.

Cinda

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Gerald Dillman
      Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one
    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By CYJSP2009
      Dear Friends, 
      2022 Brand new Joyner CV Axles and CV  Joint rebuild kits are comming 
      1.  S650.03.02.02.00 ---Joyner 650 Commando Rear
      2. TR1100.03.01.03.00 --- Joyner Trooper Front 
      3. TR1100.03.02.03.00 --- Joyner Trooper Rear
      4. D650.03.02.02.00 --- Joyner 650 Sand Spider Rear Left 
      5. D650.03.02.03.00--- Joyner 650 Sand Spider Rear Right 
      6. SV800.03.02.01.00 --- Joyner 800 Viper, SV1100 Drive shaft Left
      7.  14274 --- 650 ider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      8. 15803  ---  650 Sand Spider rear left, rear right, 800 MV; 800Viper, SV1100 Drive shaft rear left and rear right outer cv joint rebuild kit
      Attached are the part photos for reference. 
      Above parts are now on the way to USA, will be ready for inland delivery in middle of July. 
      Price: CV Axle: USD250/ Piece;  CV Joint kit (without grease): USD110  send to door. 
      There will be special discount availabe for deals completed within July 2022.  
      Buy 1 piece: Get 5% discount, 
      Buy 2 pieces: get 10% discount.
      Buy 3 pieces: get 15% discount, 
      Buy 4 and more than 4 pieces: get 20% discount. 
      Please kindly note Qty for each part is not big  and it is hard to forcast when there will be next offer for these kind of products unless there is sufficient confirmed order qty for productioin arrangement. 
      Payment method: Payoneer payment link ( can pay through bank account or credit card) or Paypal ( [email protected]) .  Payment commission paid by the buyer. 
      Interested parties, please contact [email protected]
      Thanks
      Good Luck
      Casey / Leaf Asia
      July-07-2022
       
       
       














    • By staind
      Looking for information on installing a OBD port or a lite to read codes in ECM. 
      I can not find a OBD port or a lite to read codes on this R2 with 800cc. 
      I have code readers and adapters for most ATV's. From what I've found so far. They don't have a connection for to read codes. I may be wrong. That's why I'm asking. 
      This R2 has had new IAC, TPS, MAP, fuel pressure regulator and fuel pump replaced. This was done by neighbor to try to stop surging. It still surges on start up and then settles down. But once you hit the accelerator it revs up to 2000+ rpm and stays till you block off IAC port in throttle body with finger. Once you do that it once again settles down and idles perfectly.
      I want to know what the ECM is reading to help dio it.
      This joyner is the first one I've run across. Well second one in a week. (my neighbors 2 of them) The other was a trooper with the 1100cc chery motor that had been setting for years. After cleaning up the fuse box connections. It runs like a top. Had to replace all gages with aftermarket gages. Water, oil, gas, amp. Only problem one was the water temp using original sending unit. Had to install 150 ohm resistor on the input wire to get it to read correctly + - 5 degrees. Close enough. Gas sending unit was/is for a boat tank 6" tall. All SS so it should last forever. 
      thanks Dan D. aka staind
×
×
  • Create New...