No Limits Spring Sale
-
Similar Topics
-
By Robert B
Going down a 20 deg hill engine is holding UTV back. Then something releases like going into Neutral and makes a loud clacking noise. Have to use brake to slow UTV down. Then once level it shifts back into gear. Have done shift extension does not pop out of gear.
-
By goindeep
Well now i could use a lil help... i have a trooper in my shop now that has wiring issues... this poor guy paid another shop $1000 to re wire the body control harness, and boy oh boy did they chop it up!!! I am Buillding a new harness from scratch... what i need is a diagram that tells me what each fuse and relay control on the Engine fuse/relay block.. any help is greatly appreciated!!
Josh
No Limitz
-
By TBoss 560 2023
Got a new 2023 TBoss 560 with 40 miles on it now. Noticed after about and hour of plowing snow coolant started hissing out the overflow tube. Initially made a pop or blow kind of noise and then saw some steam and smelt coolant. Coolent level is in the middle between low and high (running or not). Coolant under radiator cap is full when cold, appears nice and green. Checked oil doesn’t look milky. The temp ranges from 160-180 F running for 15-20. Noticed the other day there was some more coolant that blew out the overflow tube. I called the dealer and they said the system could be purging air. Dealer is 2+ hours away so wanting to get more thoughts before considering to bring it in. Also noticing hot/burning rubber smell but I think this is from the belt breaking in? Also notice the coolant smell from the exhaust when in higher RPMs. No white smoke from the exhaust. Also another possible issue. I notice that there’s a little bounce when on pavement. You can also hear the CVT kind of make noise with this bounce in tandem. Is this normal?
-
By CarlB
I have a 2022 Hisun 750 Sector which comes with a locked rear differential. Was wondering if it would be possible to install an unlocking differential. I see that there are some Hisun made machines that come with the unlocking rear diff, such as Cub Cadet Challenger, some of the Massimos, and probably others. My concern is whether these would be a direct bolt on, using the original axles, drive shaft, and of course matching gear ratio. I've tried to match up part numbers but it seems every brand has their own number system even for parts that I know are identical. If anyone has ever done this swap or has any information about the whether these unlocking rear diffs are comparable to the Sector, I'd appreciate your input.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.