Quantcast
Jump to content


Alternator

rwwiefer

By rwwiefer
in Joyner UTV SxS Forum

 Share

Recommended Posts

silverbullet Experienced

silverbullet

Posted
Posted

Is there an Alternator I can get at a local parts store for a 2006 Commando 650.

Also does anyone know if other UTV's wheels will fit a Commando.

Hi Silverbullet

Any early gm truck alt sigle wire.big lead goes to battery pos post.Then find the one wire that gets hot on old plug with key on install spade on wier and plug in new alt.Tape wires left over and your good to go.

  • 6 years later...
JeremyH Rookie

JeremyH

Posted
Posted

Are you talking about the 69-80 SI alternators?  My Commando alt died Saturday. If one of those will bolt up direct I'll stop tomorrow and grab one on the way home from work. 

Kinarfi Veteran

Kinarfi

Posted
Posted

where are you at on this planet :)

If you want to send your alternator to me, I can most likely fix it, I have before, I have a chip or two laying around that you can have, just look at the copper winding and if they're not burnt, then it just needs a diode or 2 and maybe a new regulator (chip) 

Your costs are postage, both ways and maybe a few incidental, but probably not.

Jeff

  • 4 weeks later...
JeremyH Rookie

JeremyH

Posted
Posted

Took the alt to autozone and they claimed they couldn't test it because they can't tell the machine what the alt belonged to and they don't have the proper wiring to hook it up.  I replaced it with a Toyota alt that bolted in but still have issues.   The new alt runs up over 15 volts.   My thinking is the rectifier/regulator is bad.    Sorry for my delayed responses but I work out of town sometimes weeks at a time.  I appreciate the offer and will likely take you up on trying to repair the other for a backup. I also noticed after I replaced it and fired the machine up that the fuel pump continued to run after shutting it off.   Only way I can stop it is to disconnect the battery.  Lots of Gremlins in this Commando.  I don't know if it's a short or possibly related to the rectifier/regulator or what.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • OBL
      can-am 2017 commander 1000xtp cannot get BUD'2 program to connect
      By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • Firewalker918
      Anyone customized their uv34XL? Also, looking for seatcovers
      By Firewalker918
      I have a 2021 UV34XL and I am kind of looking to change it up from the orange wheels and maybe do a wrap?  Please share photos of any XLs that has been modified to look better and any seat covers recommended.thanks
       
    • mehe
      Is an ATV rally a good fit for our seasonal nudist campground?
      By mehe
      Hi everyone and I hope that is not a too forward questions for us newbies. 
      My husband and I are ready (next Spring) to open our newly developed nudist campground in Iowa and we are now looking for interesting activities to host. 
      Don't worry we are not going to try and sell you a membership because as of 2 weeks ago all of our 50 campsites are sold out for the 2024 season. 
      It was my job to sell site and now that is complete i am looking for interesting actives host for weekend. 
      We have 300 acres of woods, grassland, swamps and 2 small ponds/lakes and dozens of miles of riding trails.
      we have gotten county approval for the complete 300 acres to be clothing optional. 
      We think we have a great spot for a weekend or several day ATV / mudder event. 
      Clothing would be optional for all participants and plenty of room for overnight camping and outdoor group showers. 
      Now we are looking to you pro  ATV riders to let us know if you think your group of people would fit in with ours. 
      Feel free to ask anything you would like to get a better idea of what we offer.

    • stevemurchie
      2018 renli 1500 parts
      By stevemurchie
      Cv axles
       
    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...