Quantcast
Jump to content


Wonder if it will fit?

Jarrad

By Jarrad
in Joyner UTV SxS Forum

 Share

Recommended Posts

Guest Lenny

Guest Lenny

Posted
Posted

Cruising the web, I tripped over this and am trying to figure out how to get one and how to make it work.

http://cheryengine.manufacturer.globalsources.com/si/6008830697655/pdtl/Gas-engine/1040363314/1.3L-SC-Gasoline-Engine.htm

I think stock that we are running about 95 LB FT of torque and this engine is 134. That is a nice increase and the engine is small enough to probably fit ok and I think the drive line would hold it ok. Not if your letting the clutch fly. You could probably buy the whole engine for less then a supercharger installation. Then again they also make a small diesel that has about 220 LB FT of torque and a nice 6 speed tranny to go with it. That is the one I like. Now you are getting serious. I sujested to JMC when they first took over the line to have a Trooper made from the factory with that combination. In fact, I offered my services free of charge if they would let me help redesign the Trooper. Never heard back. "This concept has so much potential, I would like to see it built to what it's potential is.

Lenny

Jarrad Community Regular

Jarrad

Posted
  • Author
Posted

I think stock that we are running about 95 LB FT of torque and this engine is 134. That is a nice increase and the engine is small enough to probably fit ok and I think the drive line would hold it ok. Not if your letting the clutch fly. You could probably buy the whole engine for less then a supercharger installation. Then again they also make a small diesel that has about 220 LB FT of torque and a nice 6 speed tranny to go with it. That is the one I like. Now you are getting serious. I sujested to JMC when they first took over the line to have a Trooper made from the factory with that combination. In fact, I offered my services free of charge if they would let me help redesign the Trooper. Never heard back. "This concept has so much potential, I would like to see it built to what it's potential is.

Lenny

Lenny, I shot you an E-mail.. That diesel motor looks good, but there would probably have to be a whole re-design of the ass end of the buggy to make it work, not to mention that there would need to be big upgrades to the differentials. I got my first pictures the otehr day from a customer who got one of the "upgraded" diffs about a year and a few months ago... It was not a pretty sight, although the ring and pinion did survive.

Guest Lenny

Guest Lenny

Posted
Posted

Lenny, I shot you an E-mail.. That diesel motor looks good, but there would probably have to be a whole re-design of the ass end of the buggy to make it work, not to mention that there would need to be big upgrades to the differentials. I got my first pictures the otehr day from a customer who got one of the "upgraded" diffs about a year and a few months ago... It was not a pretty sight, although the ring and pinion did survive.

I always figured that could be a future project. Re-designing would be a must and I would redesign the entire suspension and running gear. Hey, currently there are a lot of people putting lots of big bucks into their machines to get them to preform correctly. I wouldn't have any problem paying an extra $5000-$6000 extra for a kick ass machine that did everything well, real well. Have a diesel with 31" tires stock and a good 14 to 18" of great suspension and a low range. We could probably get Flatbed to help on the suspension design. He not only does do that as a professional he also came in 2nd overall in the Baja 1000 to back up his ability. Wow, it could get exciting.

Lenny

Jarrad Community Regular

Jarrad

Posted
  • Author
Posted

I always figured that could be a future project. Re-designing would be a must and I would redesign the entire suspension and running gear. Hey, currently there are a lot of people putting lots of big bucks into their machines to get them to preform correctly. I wouldn't have any problem paying an extra $5000-$6000 extra for a kick ass machine that did everything well, real well. Have a diesel with 31" tires stock and a good 14 to 18" of great suspension and a low range. We could probably get Flatbed to help on the suspension design. He not only does do that as a professional he also came in 2nd overall in the Baja 1000 to back up his ability. Wow, it could get exciting.

Lenny

That would be fun, There is so much more you could do with a diesel motor to squeeze more power out of them, only downside of that motor is that it is a common rail system. They can be enhanced, but not as well as the older diesels.. with those the sky and your pocket book is the limit.

Jarrad

Guest Lenny

Guest Lenny

Posted
Posted

That would be fun, There is so much more you could do with a diesel motor to squeeze more power out of them, only downside of that motor is that it is a common rail system. They can be enhanced, but not as well as the older diesels.. with those the sky and your pocket book is the limit.

Jarrad

Maybe we could break into the heads for direct injection.

Lenny

ricksrb Mentor

ricksrb

Posted
Posted

Maybe we could break into the heads for direct injection.

Lenny

What about the old VW diesel that came in their rabbit and pick up back in the late 70's and early 80's.I think it was a 1.5 or 1.6.

Kinarfi Veteran

Kinarfi

Posted
Posted

I got my first pictures the otehr day from a customer who got one of the "upgraded" diffs about a year and a few months ago... It was not a pretty sight, although the ring and pinion did survive.

share please

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • OBL
      can-am 2017 commander 1000xtp cannot get BUD'2 program to connect
      By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • Outlaw Redneck
      How to make a commando transmission work in sand spider
      By Outlaw Redneck
      Hello all. I have a 2005 Joyner sand spider 650 with the dreaded broken output shaft on the transmission. I got ahold of a 2007 joyner commando 650 for cheap that had a bad motor but a good transmission. I got it because everything i read said that the transmission would work but it seems that it will not. Due to the commando being 4x4 it has a selectable locker and a small ring gear using a "idler" gear to turn the ring gear which make the output spin the wrong direction. Is there any way that I can make this thing work? I really dont want a commando,  I like the buggy but if the trans wont work then I can only put my motor in the commando. Any help would be appreciated. I have the ring gear from the original trans but the shaft is broken and the shaft from the commando wont fit the ring gear it doesn't appear. 
    • kmiller7351
      Trying to get 550 Colman running
      By kmiller7351
      Trying to get running a 550 Colman running but I think head gasket went bad. Do i just replace with new gasket, clean up and replace or is there more to it?
    • Paul O
      Hisun HS 500 icon over the front differential on the display flashes
      By Paul O
      I boughtba new Hisun HS 500. When I press the red 4wd button the icon over the front differential on the display flashes. Is this normal?
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...