What is the Kawasaki engine model number for the side by sides listed below. I had an older Ute with the 401cc Kawasaki FJ 400D, but it had a carburetor, and a flywheel magneto ignition system.
This new 401cc engine with EFI, and electronic ignition looks like a big improvement over the old. But, I can’t find the Kawasaki engine model number?
Kawasaki 401 cc (24.47 cu. in.) single cylinder, 4-stroke, gas
Bore x Stroke: 3.23x2.99 in
Compression Ratio: 8.6:1
Maximum Torque: 21.4 lb-ft @ 2400 rpm
Valve Train: Single-Cylinder OHV
Engine Vibration: Internal Counter Rotating Balance Shaft
Fuel System: Closed-loop electronic fuel injection
Horsepower (KW): 13.5 hp
Electrical System: Starter/Generator — Solid State Regulator
(Note: Some versions/listings state: "Alternator Output (max)22.9 amp")
Lubrication: Pressurized Oil System
Oil Filter: Spin-On (Item#: 49065-7010)
Cooling System: Air Cooled
Ignition System: Electronic Inductive Spark
Air Cleaner: Replaceable Dry Cartridge (item #: 11013-7029)
Utility vehicles/side by sides that use this engine:
2021MULE SX™ 4x4 FI
2020 E-Z-GO Express™ S4 Elite Gas
Cushman Shuttle 4 EFI Gas
Cushman Hauler 1200
I recently (like yesterday) bought a secondhand hisun 400cc 4x4 SxS. It’s a one owner 2012 model only done 125 kms. It runs rough and won’t idle for long without cutting out., even when it’s warm. Here’s what I’ve done to try to sort it without success: cleaned air filters, cleaned spark plug, emptied old fuel and replaced, replaced fuel filters. I notice that there is a hose coming from the carburettor (on drivers side). It goes to a T piece but neither branch connects to anything and I can’t seem to find any places where they would naturally attach. Any suggestions appreciated. Davo
Hi guys! Can anyone confirm whether this is actually the 2018 model? (LINK) My friend says its not but the sales representative claims that it is. I've been burned before and I want to take all precautions before going any further with this dealer.
Thanks and happy riding!
By matt wichert
Hello, I’m writing this because I desperately need some assistance with front axle for kubota rtv 900 2000 model.
My stepfather told me his two front axles of his kubota rtv broken separately yesterday and he couldn't distinguish which is for left or right.
Are left and right front cv axles the same on a 2000 kubota rtv 900 4x4 ? And what's the cost of kubota rtv 900 axles ?
I don't learn much about kubota rtv and hope someone tell me.
Please include UTV year, make, model, cc, and technical issue (if you have one)...in your title when posting. 01/06/2017 Having a well written topic title will ensure that your topic will be found in searches and that people know what they are readBy Travis
Please include UTV year, make, model, cc, and technical issue (if you have one)...in your title when posting.
Having a well written topic title will ensure that your topic will be found in searches and that people know what they are reading, to save time