Quantcast
Jump to content


Trooper Shifter

whobbies

By whobbies
in Joyner UTV SxS Forum

 Share

Recommended Posts

whobbies Contributor

whobbies

Posted
Posted

Our Troopers shift mechanism is very tight and the cables are all pretty new and in good condition, it's lubricated but it is still very stif to operate, is this normal? If not can someone give me a clue to what would cause this? I tried the obvious that's why I'm asking.

Thanks,

Tony

Quig Community Regular

Quig

Posted
Posted

Our Troopers shift mechanism is very tight and the cables are all pretty new and in good condition, it's lubricated but it is still very stif to operate, is this normal? If not can someone give me a clue to what would cause this? I tried the obvious that's why I'm asking.

Thanks,

Tony

My trooper shifts great, ,, locking differentials are easy, exactly what is hard shifting? transmission?differentials? I'm not a mechanic, just driver.

See you are selling trooper,, wish we lived closer, would buy. Have buds who want one.

rocmoc Grand Master

rocmoc

Posted
Posted

Mine is tight and you have to hit the gear nearly perfect. I drove Lenny's and his shifts easier than mine. Mine was a little easier/better before I had the trans work done.

rocmoc n AZ/Mexico

whobbies Contributor

whobbies

Posted
  • Author
Posted

My trooper shifts great, ,, locking differentials are easy, exactly what is hard shifting? transmission?differentials? I'm not a mechanic, just driver.

See you are selling trooper,, wish we lived closer, would buy. Have buds who want one.

I can ship it to you, my company gets great rates, I could always check.

It feels like the shifter binds, I may have to disconnect each cable to see if that is where the friction is?

Let me know if your friend is interested.

Thanks,

Tony

whobbies Contributor

whobbies

Posted
  • Author
Posted

Mine is tight and you have to hit the gear nearly perfect. I drove Lenny's and his shifts easier than mine. Mine was a little easier/better before I had the trans work done.

rocmoc n AZ/Mexico

Same here, third gear has to be dead on, yours too?

Quig Community Regular

Quig

Posted
Posted

I can ship it to you, my company gets great rates, I could always check.

It feels like the shifter binds, I may have to disconnect each cable to see if that is where the friction is?

Let me know if your friend is interested.

Thanks,

Tony

Any idea how much shipping would be?

My only shifting prob, is when I'm trying to speed shift into 3rd, sometimes goes to 5th.

whobbies Contributor

whobbies

Posted
  • Author
Posted

Any idea how much shipping would be?

My only shifting prob, is when I'm trying to speed shift into 3rd, sometimes goes to 5th.

What is your zip code?

Thanks,

Tony C.

whobbies Contributor

whobbies

Posted
  • Author
Posted

what are you asking for the trooper? where are you located?

Rick,

Just found out that the company we use does not ship vehicles. There are many in the US that do so no crating is required. I will have my office make a few calls, and you may do the same if you want. Our zip code is- 33852 and we are located in Lake Placid Florida.

I have a loading dock and fork lift so loading is no problem. The weight is 1800 pounds I think. Length about 8' and width about 5'. That should be enough info for a solid quote.

You can always call me at: 800 444-1995 Just let the girls know what it is in reference to.

Thanks,

Tony C.

Quig Community Regular

Quig

Posted
Posted

Rick,

Just found out that the company we use does not ship vehicles. There are many in the US that do so no crating is required. I will have my office make a few calls, and you may do the same if you want. Our zip code is- 33852 and we are located in Lake Placid Florida.

I have a loading dock and fork lift so loading is no problem. The weight is 1800 pounds I think. Length about 8' and width about 5'. That should be enough info for a solid quote.

You can always call me at: 800 444-1995 Just let the girls know what it is in reference to.

Thanks,

Tony C.

Length is just over 10 ft

whobbies Contributor

whobbies

Posted
  • Author
Posted

No prob,, I'm old, I screw up alot!! Just saw you had it wrong,,, appreciate all your input,,,Quig

Yea I'm getting there, can't see straight anymore, can't spell (never could), I always hired people better than myself, and got away with it for over thirty years now. I beginning to wonder how long I can go on, I'm having a difficult time finding the smarter younger ones.

whobbies Contributor

whobbies

Posted
  • Author
Posted

what are you asking for the trooper? where are you located?

Rick,

I'll take $5000.00 for it. I also have some spare parts like a starter, cables, some hydrolics.

Here's what is wrong. By the way it runs great. I also added a good quality K&N filter piped up.

1)- Time to address the diffs, I have one kit that I will include. (shims, hardware the $100.00 kit)

2)- Front 4WD actuator crapped-out

The condition is great as well, it s yellow. Has the spare tire mounted on the rear cargo thing. Tires are in good condition at least 60% left.

It's a nice product just too much for me with my life demands to keep up on it. We also live in a sugar sand area and I think I am going to get her an automatic 4WD big 4-wheeler, one of those family models.

Thanks,

Tony

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • MilSurpYinzer
      New Mexico etc
      By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • Eman85
      New owner Massimo MSU500
      By Eman85
      I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 
        Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 
    • RBonds007
      2019 Cub Cadet Challenger 400, trailer to transport the Challenger, and new, never used winch for sale
      By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • Stan M
      Shift lever stuck on 2026 Massimo T-Boss 760L
      By Stan M
      I just received my 760L a couple of days ago and it's been difficult to shift between gears from the get go. At first I could rock the unit and it would free up for a while but now it's just stuck in reverse and rocking doesn't work. I had the UTV delivered directly from Massimo and there aren't any service centers in my area. Any ideas? Thanks

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...